Exhaust section, stainless steel, Honda CBR500
€87.08
Section, Final, Stainless, CBR500, suitable for our systems EXPS-0045 and EXPS-0046
TYGA no: EXPT-0041
SKU: hon-10342 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopLower cowling RSW, Honda NSR250 MC21/MC28
€241.68
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
This product is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9012
This lower cowling is designed to be used with stock or race systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9014
SKU: hon-10238 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopCarb insulator, Honda NSR250 MC21
€373.11
Carb insulator, Honda NSR250 MC21
TYGA no: 16210-KV3-830
SKU: hon-10894 Categories: ALL products, Honda, NSR250, NSR250 MC21, Various partsSeat set street, Honda NSR250 MC28
€608.81
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0045Â
SKU: hon-10243 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, By product, Honda, NSR250 MC28, ShopBearing, Piston, MC28
€13.44
Bearing, Piston, MC28
TYGA no: 91102-KV3-771
SKU: hon-11117 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Side fairing right RC211V, CBR400RR
€167.21
This is a replacement part for bodywork set BPFS-0019
Tail Lamp, Ninja 250R/300R 2013 -18
€34.14
Tail Lamp, Ninja 250R/300R 2013 -18
Exhaustset stainless steel carbon silencer round, Kawasaki ZXR250
€639.76
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round carbon silencer EXSL-0032
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.P Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifold<iframe width="560" height="315" src="https://www.youtube.com/embed/z5hGKrpQ56c" frameborder="0" allowfullscreen></iframe>
TYGA no: EXPS-0015Â
SKU: kaw-10017 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop