Side fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Tank Filler Cap Breather Rubber, MC28
€11.45
Tank Filler Cap Breather Rubber, MC28
TYGA no: 17646-MN8-700
SKU: hon-11167 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Gasket cylinder 0,4 NF5
€12.29
Gasket, Cylinder, 0.4mm NF5
Fits MC16~28. Use to adjust deck height/squish/compression ratio.
TYGA no: 12191-NF5-610
SKU: hon-10413 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopGenuine HRC mechanic Gloves, Size M
€95.39
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: 82040-N99-000
SKU: hon-11305 Categories: ALL products, Bike covers, By model, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, Merchandise, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2Carbon rear hugger, Honda VTR1000 Sp2
€191.84
This stylish lightweight carbon hugger fits on the SP2 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using only existing mounting points on the stock swing arm.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant as well as the fasteners provided to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP1 which uses a different shaped swing arm. See hugger BPCH-7120 for SP1 application
Beautiful, perfect fitment and give your bike that HRC look.
Race airbox, ram air , Honda RVF400
€121.65
This race airbox has a larger and longer inlet than stock to allow for greater airflow and better breathing including ram air affect. Unlike other similar products available, as well as the modified inlet, this airbox increases the volume by 8% overstock for more stable performance. Uniquely, among aftermarket suppliers, the Tyga airboxes retain the correct profile on the base for an effective seal when installed just like the original airbox.
NOTE: This airbox will also fit the Honda VFR400, but you will need to shorten the airduct. Because of the cross beam on the frame is in a different position, it would hit the air duct at the front.
TYGA no: BPFX-9109
SKU: hon-10361 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Subframe set, RC36-2, RC30 style
€486.77
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: TYLY-0314
SKU: hon-11447 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSet exhausts side by side stainless steel, Honda NSR250 MC28
€769.95
THE exhaust set for your Honda NSR250 MC28, cone welded for that HRC factory look!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencers clamping hardware which mounts directly to the stock MC28 silencer stays for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0005A
This product, EXCS-0005B, has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0005b
SKU: hon-10306 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC28, Shop