Exhauststay carbon, NC30 NC35
€93.84
Direct replacement for the stock NC30 exhaust stay. This item is ideal for single seat conversions such as the Tyga RC45 style seat cowlings, BPFT-9013. BPFT-9004 and BPCT-9004 and is supplied as part of our RC211V seat conversions for the NC30 and NC35. It is made from 100% lightweight but very stiff carbon fiber composite.
This product also fits the NC35 when using our race exhaust systems and silencers and replaces the stock passenger peg hanger/exhaust stay assembly.
TYGA no: TYLY-1011
SKU: hon-10078 Categories: ALL products, Carbon, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Various parts, Various parts, VFR400RR NC30Top triple clamp CNC black RACE, KTM RC390, 2022-
€442.15
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-2031
SKU: ktm-10216 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsTube, Carbon, Round, 87.5mm x 330mm
€96.53
Made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Used JDM Honda Headlights Refurbished (set)
€330.57
TYGA no: Used NC30 Headlights
SKU: hon-11532 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsTank Protector, Carbon, NSR250 MC28
€133.95
Tank Protector, Carbon, NSR250 MC28
This real carbon protector is designed to fit snuggly on the Honda NSR250 MC28 fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCX-0027
SKU: hon-11068 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Seat set race GP-T, Honda VFR400 NC35
€927.76
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0166
SKU: hon-10633 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Upper cowling set GRP endurance , Honda VFR400 NC30
€434.45
Upper Cowling Set, Endurance, (GRP) NC30
This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
TYGA no: BPFS-0152
SKU: hon-10639 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30Belly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032