2T blank plug, NSR250
€7.37
Replaces the 2T oil injector pump for pre mix use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Note for blocking the extra 2T feed on later model oil pumps.
On later engines (some MC21 and all MC28, there is an extra oil feed to the cases which can be observed when the oil pump is removed. HRC used to supply a little aluminium plug that you knocked into this extra hole to blank it off. However, that is discontinued so what to do depends on whether the conversion to pre-mix is permanent or not.
If permanant, then we recommend you make sure it’s all clean and degreased, and then fill the hole with epoxy steel. Allow it to cure and it’ll never leak.
If you’re not sure if you’ll ever go back to the oil pump, but would like the option, then we suggest covering the hole with a small thin disc of steel or plastic, and then using a RTV sealant to sort of glue that in place and also block it off. The RTV will stop any leaks, and the small disc will stop any RTV going down the hole. This is then soft enough to be cut away at a later date should you need to.
Compatible products:
TYLY-0015 Plug holder
TYGA no: TYLY-0012
SKU: hon-10388 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various partsO- ring for TYGA silencer 2 stroke
€4.33
O- ring for TYGA silencer 2 stroke
TYGA no: EXOR-000
SKU: alg-10116 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Yamaha, YZ250 2005-15Carbon engine cover (right),(5 speed engine) Monkey 2022-
€93.94
TYGA no: BPCC-7542
SKU: msx-10516 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2021-, ShopSide cowling B left (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling B, Left, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7231L TYGA Performance Side Cowling A, Left, Race (GRP), KTM RC125/200/390.
BPCX-7231L TYGA Performance Side Cowling A, Left, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
TYGA no: BPFX-7331L
SKU: ktm-10048 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, ShopExhaustclamp single 4 (4 stroke)
€24.83
Stainless steel clamp. 4 internal diameter with rubber protection for a firm, but friendly grip on your silencer. Includes mounting bolt, nut and washer.
Compatible with Silencers EXSL-0012, EXSL-0013, EXSL-0022 and EXSL-0023.
TYGA no: EXCL-0013
SKU: alg-10065 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Seat Cowling (With Carbon), NC35 T13, Assy.
€361.17
This is the seat cowling with carbon (front section and around top and bottom air ducts) and is used in the NC35 T13 style seat cowling kit BPFS-0118.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPCT-9218
SKU: hon-10809 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Seat pad, RC30 style replacement
€156.00
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPSP-0013
SKU: hon-11471 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsFront Fork Preload Adjusters blue/red (Pair), Honda MC18/MC21/MC28/NC30
€262.31
Fork Caps, Full adjustment.
Many race replica street bikes are graced with adjustable suspension as standard, but as with many ‘so-called’ adjustable suspension systems on production bikes, the actual adjustment available is very limited. The manufacturer lets you adjust within very tight parameters so that it’s difficult to get the settings wrong.
The TYGA fork tops do away with this dictator attitude, allowing you to take control of your set-up.
The preload adjustment is increased, with an extra 4mm possible, and we also provide a full 20 clicks of rebound adjustment that works!
Another great feature is the easy-turn knob for rebound adjustment. No more fumbling around for the screw driver.
The fork tops are manufactured from top quality anodized 6061 T6 aluminium and come ready to install, and are a direct replacement for the standard parts. Securing to the fork tube is by a pin spanner that is provided.
Basic suspension rebuild skills are useful for fitting, but full instructions will be provided.
Fits MC21SE/SP, MC28SE, MC18SP & NC30.
Please note that these Fork Caps will not work with ‘R’ spec NSR forks, or ’89 NC30, as these are preload adjustment only type forks.
TYGA no: TYLY-0038
SKU: hon-10355 Categories: ALL products, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30