Carbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopKit, Fairing Set, Race, GRP, Stock Shape, VJ21
€700.54
Kit, Fairing Set, Race, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-1019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0192
SKU: suz-10119 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Decal, Side Fairing, Ninja Black, Ninja 250R 2008 -12
€6.02
Decal, Side Fairing, Ninja Black, Ninja 250R 2008 -12
TYGA no: 56054-0059
SKU: kaw-10228 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopRear fender (under) RC211V, CBR250RR MC22
€244.39
Rear Fender/luggage compartment specially designed to be used with our RC211V style seat cowling for the MC22. This incorporates mounting points for registration/number plate and turn signals which can be cut down for race use.
Meterstay T8,CBR250RR MC22
€63.75
This stay is a replacement for the stock one when fitting our T8 bodywork. It is not an exact fit if used with stock fairing because front hole position is changed.
Carbon Lower cowling, stock shape, NXA RS250R (2001- ’08)
€524.11
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
Cowling center black, Honda MSX125 GROM
€17.03
Cowl, Center, RR., Asteroid Black Metallic
TYGA no: 77230-K26-900ZA
SKU: MSX-10113 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopLower cowling RSW, Honda NSR250 MC21/MC28
€241.68
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
This product is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9012
This lower cowling is designed to be used with stock or race systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9014
SKU: hon-10238 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC21, NSR250 MC28, Shop