Front Fork Preload Adjusters blue/red (Pair), Honda MSX125 GROM
€172.49
Front Fork Preload Adjusters, Pair, MSX125 Grom, Red/Blue
These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.
These adjusters allow you and extra 6mm of preload from standard.
Supplied in red and blue anodised finish, (see TYLY-1097 and TYLY-2097 for other colour versions too) these adjusters are as beautiful as they are functional.
TYGA no: TYLY-0097
SKU: MSX-10137 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsAirbox carbon, A kit, Honda RS250 NX5
€673.59
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0008
SKU: hon-11311 Categories: ALL products, High performance, RS250R NF5 / NX5, Various partsClutch plate C, MC28R
€17.53
Clutch plate C, MC28R
TYGA no: 22201-KAE-000
SKU: hon-11157 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Ignition Switch Holder, CNC Black, NSR250, MC18
€121.39
Ignition Switch Holder, CNC Black, NSR250 MC18
This is a removable ignition switch/lock holder for our NSR triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-1270, TYLY-1245 and TYLY-1247
TYGA no: TYLY-1170
SKU: hon-10716 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsClutch lifter plate, Honda Monkey 125 2022
€26.82
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: TYLY-0167
SKU: msx-10514 Categories: ALL products, High performance, Honda, Shop, Various partsUpper cowling stock race, Honda RVF400 NC35
€244.74
RVF400 Race Upper Cowling (no headlight holes). Direct replacement for OEM item for racing use. Can be used with OEM screen and mirror stay.
Compatible Parts:
Tyga lower cowlings: BPFL-0003
TYGA no: BPFU-0009
SKU: hon-10484 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon race airbox lid, Honda NSR250 MC21/MC28
€210.89
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
As well as potential power improvements over the stock airbox, there is no denying it certainly looks a lot more trick than the Honda one too!
TYGA no: BPCX-9010
SKU: hon-10323 Categories: ALL products, Carbon, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopHandlebar set 41 mm, black
€216.82
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 41 mm. right way up front suspension see chart below for examples.
7 degree angle for a comfortable, yet sporty feel.
BMW Strada
Honda CB-1 89-90
Honda CBR1000F 93-96
Honda CBR400 NC23/29
Honda CBR600F2
Honda CBR600F3
Honda Hawk 650 RC31
Honda NSR250 MC18/21/28
Honda VFR400 NC30
Honda VFR750 90-97
Honda VTR1000 98-02
Kawasaki EX650R 06-09
Kawasaki ZX10 88-90
Kawasaki ZX6E
Kawasaki ZX6R 95-97
Suzuki GSF400/600 Bandit
Suzuki GSXF600/750/1100 Katana
Suzuki GSXR750/1100 86-87
Suzuki RGV250 VJ21
Suzuki SV650 99-09
Yamaha FZR750
Yamaha YZF600 94-95
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1077
SKU: alg-10087 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, Shop, Various parts, VFR400RR NC30