Exhaustset race Stainless steel Silencer aluminium round , NC30 NC35
€1,059.04
The TYGA Full Race System has been designed with maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round aluminium silencer EXSL-0047 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0053
SKU: hon-10358 Categories: 4 stroke exhaust sets, ALL products, By model, By product, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Section, Final, Stainless, CBR250/300R
€103.08
Section, Final, Stainless, CBR250/300R
TYGA no: EXPT-0116
SKU: hon-10797 Categories: ALL products, By product, Exhausts, Stock list, all modelsSet exhaust pipe stainless steel silencer with carbon cap , Yamaha R25/R3
€897.95
Set, Exhaust Pipe, Race System, Yamaha YZF-R25 and YZF-R3, Stainless, Stainless Silencer, Carbon End cap
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0073 EXPS-0074 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0072
SKU: yam-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Meterstay aluminium, NSR250 MC28
€212.73
Direct replacement for stock item, 50% of the weight
Compatible Parts:
All MC28 upper fairings
TYGA no: TYLY-0005
SKU: hon-10295 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, Shop, Various partsBracket front brake CNC silver 40mm Brembo, Yamaha R25/ R3
€51.61
Bracket, Front Brake, 40 mm Brembo Conversion, Silver, Yamaha R25/R3
CNC machined brake caliper support for your Yamaha R25/R3.
Designed and machined in house. Crafted from 6061 T6 aluminium, this caliper support allows you to fit a Brembo Goldline P4 30/34 caliper (40mm mounting pitch) to your R25/R3.
Tried and tested with the standard master cylinder and standard brake lines with great performance.
For race or track day use we recommend upgrading your master cylinder for ultimate stopping power.
Exhauststay left TYGA VJ21, Suzuki RGV250 VJ21
€52.50
This product is designed to be installed as part of our TYGA Seat cowling kit for the VJ21 Kit BPFS-0121 and substitutes for the stock passenger peg hangers. It retains the use of stock mounting hardware and there is a level of adjustability in the mounting position due to the slot for the clamp position.
This product can be used as a stand alone item and does not need the rest of the kit and is suitable for replacing passenger pegs on any race VJ21 for example.
Please note this product is ‘handed’ and you need one of each TYLY-0100L and TYLY-0100R for one bike.
TYGA no: TYLY-0100L
SKU: suz-10100 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersCarb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
€81.92
Carb Service Kit A, 48 pieces, Honda VFR750R RC36 (94-97)
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC36 (1994-1997)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-013 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (Part of Honda No. 16016-MV9-730 Screw Set)
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-009 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
8x OR-023 Air Cut Valve O-Ring, Material Viton 70A (Part of Honda Kit No. 16041-MZ5-600 Gasket Set C)
4x OR-006 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MZ5-600 (16010-MZ5-920) Gasket Set A)
4x OR-016 Fuel Tee O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-024 Vacuum Breather O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x OR-011 Overflow O-Ring, Material: Viton 70A (Part of Honda Kit No. 16040-MZ5-600 Gasket Set B)
4x CS-004 Choke PLunger Cap, Material: HNBR (Part of Honda assembly 16046-MZ7-640)
TYGA no: CKA-Honda-VFR750R-RC36 (94-97)
SKU: alg-10347 Categories: ALL products, Carburettor Service Kits,, Honda, RC36-2 -> RC30 replica products, various parts, various parts, VFR750F Gen 4, 94-97