Carbon side cover left, Honda Monkey 125 2018-
€264.80
Carbon side cover left, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7142L
SKU: msx-10439 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopTail tidy TYGA “GRP”, Honda MSX125SF GROM
€180.73
Splash Guard, (Plastic), MSX125 Grom
Easy to install, prevents road debris and water flicking up on the rear of your bike and looks way cool!
TYGA no: BPFX-9732
SKU: MSX-10471 Categories: ALL products, Bodywork and carbon, Honda, MSX125SF 2016 -2020, Shop, Various partsCarbon set, Honda CBR600 2007-11
€453.72
This set comprises the carbon products below. Enjoy great savings on product prices and free SAL shipping when ordering this set.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
Bracket front brake CNC black 84mm Brembo, Kawasaki Z125
€45.19
Bracket, Front Brake, 84mm Brembo Conversion, Black, Kawasaki Z125
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0134)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Carbon front fender Dax German
€230.75
Front Fender, (Carbon) German type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCF-7037
SKU: MKY-007 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopFuel Tank, GRP, NSR250, MC21, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-0004Painted
SKU: hon-11281 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersCover headlight upper cowling (pair) clear, Honda VFR400 – RVF400
€27.34
Cover, (Clear), pair, Headlight, Upper Cowling, Endurance
To be used on the TYGA Endurance Fairings for NC30/35
TYGA no: SCRE-9010
SKU: hon-10643 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, VFR400RR NC30Carbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all models