Cowling, Side, LH, Ebony, Ninja 250R 2008 -12
€259.23
Cowling, Side, LH, Ebony, Ninja 250R 2008 -12
TYGA no: 55028-0271-H8
SKU: kaw-10199 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSet pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L
€827.77
Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.
Front fender RC211V, NC23 NC29 NC30
€71.75
ttaches to the original mounting points and can be used with all Tyga and Honda bodywork. Suitable for NC30, NC29 and NC23 models
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-9002
SKU: hon-10072 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Carbon instrument surround, Honda MSX125 GROM
€52.62
Instrument Surround (Carbon), CBR500, MSX125 Grom. Fits over the instrument and transforms the appearance of your bike. Install with double sided tape provided. Easy to install in seconds.
TYGA no: BPCC-7728
SKU: MSX-10075 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, CBR500R, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopBig bore kit 300cc wiseco, NSR250 MC18/MC21/MC28
€2,264.37
This 300cc Big Bore Kit is identical to the TPER-0007 300cc Big Bore Kit, but the standard 300cc pistons are replaced with high performance options.
In this case we have forged Wiseco pistons that are lighter and stronger than stock. They use Wiseco rings, clips and pins.
See below for performance details for TPER-0007.
Bore & Stroke is 59mm x 54.5mm giving a total displacement of 298cc.
Parts included in the NSR300 kit.
Cylinder x 2 (includes head studs, RC valve, pulley & nut and washers)
Rear Head x 1
Front Head x 1
Piston x 2
Ring set x 2
Piston Pin x 2
Piston Clip x 4
S/E Bearing x 2
Head gasket x 2
Cylinder gasket x 2
RC Valve cables x 4
Water hose x 1
Exhaust Manifold x 2 (to fit TYGA pipes)
Other information:
There is no problem about the RC valves hitting the piston due to thin cylinder wall thickness. This is not an issue on our kit as it’s using different
cylinders, not modified NSR250. They are genuine OEM Honda cylinders, made and plated in Japan to their typical high quality.
The RC valves are easier to adjust than ever on the 300 kit, as there’s only one adjuster screw to play with, and each cylinder marked at the correct ‘fully open’ position for simple setting.
Exact Jetting requirements for your area and application cannot be provided due to differing atmospheric conditions around the world. However, following are some base settings to work from:
MC21 Std bottom end, Wire splice, TYGA Pipes, Airbox lid mod with filter.
Temp: 29 C
Press: 1015mb
Hum: 65%
Alt: 30m
MJ – #182/#185
JN – Std./Std.
SJ – #38/#38
AS – 1.5 turns out
PwrJ – Std./Std.
Tip: Cooler temps, higher pressure and/or lower humidity require richer jetting. High altitude requires leaner settings. Starting off with rich settings will in the worse case foul a plug. Too lean a setting may destroy the engine.
This jet set-up is for guidance only. TYGA Performance cannot be held responsible for any engine damage incurred due to incorrect settings.
At present, this kit is available by special order. Each kit takes approx. four weeks to prepare.
TYGA no: TPER-3007Â
SKU: hon-10390 Categories: ALL products, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopAirbox "GRP", Honda NSR250 MC21/MC28
€423.04
Airbox, GRP, NSR250 MC21/MC28
This high quality GRP air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and GRP for light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank
See also BPCX-0007 for the same airbox in carbon/kevlar
*please do note some product photos are for reference and show the Carbon/Kevlar version fitted on our NSR250 project bike
TYGA no: BPFX-0007
SKU: hon-11070 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon fairing stay side 87mm (pair), universal
€82.47
Fairing Stay, Side, Pair, Carbon, NSR250, GP-T, Assy.
Designed specifically for the NSR250 GP-T fairing, these side stays fit to the frame in the same position as the steel Honda stays. Made from lightweight carbon fiber with nylon bungs and ‘R’ clips, they are longer than stock and provide the correct position for perfect fitment of the GP-T fairing. This product can also be used with any other race fairings or similar application. See drawing for dimensions. Also see similar product BPSY-0144 Assy.
Dimensions:
BPSY-0143: length from centre of mounting hole to inside face of fairing with nylon bung = 87 mm.
BPSY-0143B: length from centre of mounting hole to inside face of fairing with nylon bung = 77 mm.
Compatible products:
TYGA upper cowlings, BPFU-9033 and BPCU-9033.
TYGA no: BPSY-0144
SKU: hon-10537 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, NSR250 MC28, ShopSeat set street RC211V, NC35 kit
€749.18
This set of bodywork is designed to replace the NC35 stock seat cowling with the street version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This product has a roomier riding position and enhanced modern looks over the stock seat cowling.
This product is suitable for the NC35 and is the base version without carbon fiber front section to keep the cost to a minimum. We also offer a deluxe version of the same product with carbon front section for enhanced looks and strength as well as a pure race one without the tailight or registration/license plate holder. See:
BPFS-0029 (street, carbon)
BPFS-0030 (race GRP)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0035
SKU: hon-10136 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, Shop