Bracket front brake CNC silver 84mm Brembo, Kawasaki Z125
€45.19
Bracket, Front Brake, 84mm Brembo Conversion, Silver, Kawasaki Z125
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1134)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0134
SKU: kaw-10059 Categories: ALL products, CNC parts, Kawasaki, Stock list, all models, Z125 2016-Exhaustset race Stainless steel carbon Silencer round w cap, NC30 NC35
€1,251.76
TYGA stainless steel racing exhaust, the best set available in the market
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round carbon silencer EXSL-0112 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0026
SKU: hon-10303 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Lower Cowling, Rear, Carbon Stock Shape, RGV250 VJ23
€326.68
Chain Guard, Rear, Carbon, RGV250 VJ23
Fits: Suzuki RGV250 VJ23
Set exhausts GP style stainless steel, Suzuki RGV 250 VJ22
€702.49
Your Suzuki RGV250 VJ22 just needs this beautiful cone welded stainless steel exhaust, everything you need performance and looks.Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.New! Tyga Performance RGV250 exhausts are now supplied with a double ‘O’ ring manifold for superior sealing. In addition, the ‘O’ rings are made from Viton which are resistant to automotive fluids and better able to withstand higher temperatures.By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value and are available in two configurations.side by side (left and right exiting) stainless steel chambers, EXCS-0009GP (conventional twin right exiting) stainless steel chambers, EXCS-0010
The graph showing the power output of an RGV250. This independent test was conducted in the UK by Triple MMM Racing and compares the TYGA Performance EXCS-0010 stainless steel GP system, to a stock Suzuki system.This product EXCS-0010 is made from stainless steel and has both chambers exiting on the right.
Parts included with this product:1 x left side chamber, GP (right exiting) stainless steel1 x right side chamber, GP(right exiting) stainless steel1 x silencer double clamp and mounting bolt, washers and nuts2 x manifolds4 x manifold ‘O’ rings2 x mounting flanges4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set<iframe width= 560 height= 315 src= https://www.youtube.com/embed/LmQAQqP9_AQ frameborder= 0 allowfullscreen></iframe>
TYGA no: EXCS-0010
SKU: suz-10024 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, RGV250 VJ22, Shop, Suzuki Tags: aprilia rs250 suzuki RGV250.circuit pipes, Cone welded racing pipesStep, L. Fr., MC28
€77.04
Step, L. Fr., MC28
TYGA no: 50670-KV3-700
SKU: hon-11143 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28VHM Cyl. Headset Husqvarna TC/TE 125 ’16 –
€271.95 €255.63
VHM Cyl. Headset Husqvarna TC/TE 125 ’16 -> (alg-10221)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
1x cylinder head
1x standard insert (11.60cc)
Optional inserts:
– blind
– 11.20
– 11.40
– 11.80
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Screen clear stock shape, Suzuki RGV 250 VJ23
€52.00
Screen clear stock shape, Suzuki RGV 250 VJ23
TYGA no: SCRE-0064
SKU: suz-10133 Categories: ALL products, CNC parts, Honda, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250Lower Triple Clamp, CNC Black, CBR600RR Forks/NSR MC18, Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR, MC18 Shaft
CNC machined TYGA lower triple clamp for the NSR250 MC18 to take 53 mm diameter CBR600RR forks.
For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set
TYLY-1245 Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC18.
TYGA no: TYLY-1345
SKU: hon-10713 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18