Carbon exhaust guard set, Honda CBR250 2011
€195.42
This lightweight carbon exhaust guard set coprises of front and rear guard and replaces the ugly heavy stock item and will enhance the beauty of your CBR.
Not. Product can be supplied without badge if you prefer. Just state ‘no badge’ in the comment box when ordering and we will supply unbadged.
TYGA no: BPCC-0016A+B
SKU: hon-10311 Categories: ALL products, Bodywork and carbon, Carbon, CBR250R 2011 - 15, Honda, ShopSet pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon swingarm covers, Honda CBR1000 2008 – 11
€235.94
These lightweight carbon covers fit over the stock swing arm and it is designed to protect against scratches and damage to your swing arm in the event of an accident. The right side also incorporates a ‘sharkfin’ compulsory in some classes of racing.
TYGA no: BPCC-8001
SKU: hon-10448 Categories: ALL products, Bodywork, CBR1000 2008-11, CBR1000 2012-, Honda, ShopSilencer carbon round (4 stroke) 2
€348.60
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
TYGA no: EXSL-0012
SKU: alg-10029 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Stainless silencer 380mm
€231.41
Silencer, Stainless, Round, Four Stroke, 50.8mm., Assy
The Dimensions of this silencer are as follows:
I.D. 50.8mm (slip-on section) O.D. 4 inch. (diameter of stainless tube) L. 380mm Suitable for Ninja 250/300 and medium capacity four stroke motorcycles.
TYGA no: EXSL-0064
SKU: kaw-10066 Categories: 4 stroke exhaust sets, ALL products, Exhausts, SilencersSeat cowling hump TYGA, Suzuki RGV250 VJ21
€198.72
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021R and L. for installation.
TYGA no: BPFT-9021HÂ Â
SKU: suz-10101 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Carbon workshop tray 360x240x1,2 , kevlar/kevlar
€143.58
Carbon/Carbon Workshop Tray 300x200x1.2 mm
Used by factory teams all over the world , Motogp, MXGP or F1.
Using high end automotive and aerospace technology, this useful and beautiful tray will be the envy of all your friends and racing competitors and we promise that it will become an essential and indispensable part of your tool kit, as it has ours! The tray is both lightweight and extremely strong due to the method of construction and the materials used. Using a balance of craftsmanship and technology, each tray is individually laminated by skilled workers in a precision aluminium mold where it is subjected to high pressure to give unrivalled crisp and sharp finish which is both chemical and abrasion resistant.
We have been testing these trays for several months now and given them no mercy. We’ve put brake fluid, carburetor cleaner, engine oil, gasoline and other nasty fluids in them and they have retained both their strength and beautiful sheen. We have used them to hold various motorcycle parts and tools and apart from minor surface scratching which is to be expected, the hard epoxy finish has proven to be extremely tough and durable, but forgiving enough not to damage any delicate parts.
Of course, like all trays, these can be used around the home for drinks, fruit bowl and other decorations. If you have an application or require a similar product in large quantities, please contact us and we will be happy to discuss all details including design through to manufacturing and delivery.
These trays are easily stackable and weigh only 240 grams
We offer four variations of the tray in different configurations of carbon and Kevlar to suit your personal tastes:
TYTO-0004A Carbon/Carbon
TYTO-0004B Kevlar/Kevlar
TYTO0004C Kevlar/Carbon
TYTO-0004D Carbon/Kevlar
TYGA no: TYTO-0011B
SKU: alg-10383 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Bodywork and carbon, By product, Cagiva, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Dax and Chaly, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Hawk/Bros 400/650, Honda, Honda MX, Husqvarna MX, Kawasaki, Kawasaki MX, KSR110 2005- 10, KTM, KTM MX, Mito 125, Monkey 125 2018-, Monster, Motocross, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NR750, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, PCX150, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Suzuki, Suzuki MX, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, Yamaha MX, YZ250 2005-15, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LExhaust Chamber, Left, Side By Side Type, Stainless Steel, MC18
€443.15
Bare replacement left side chamber for EXCS-0003