Inner Cowling, (Carbon), Stock Shape, NSR250, MC18 (1989)
€189.63
Inner Cowling, (Carbon), Stock Shape, NSR250, MC18 (1989)
Replace your stock plastic inner cowling with this trick looking carbon replacement. Installs in the same way as the stock one.
TYGA no: bpcc-0041
SKU: hon-10893 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopVHM Cyl. headset Yamaha YZ125 ’05-
€271.95 €256.04
VHM Cyl. headset Yamaha YZ125 ’05-> (alg-10202) AA33077VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.00cc)Optional inserts:– blind– 10.80– 11.00– 11.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33077Â Â Â Â Â Â Â Â
SKU: alg-10202 Categories: ALL products, Motocross, Shop, VHM products, Yamaha, Yamaha MXRubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Spigot, Cowl, RH, VFR750 Gen, 90-93
€8.10
TYGA no: BPSY-0320
SKU: hon-11328 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Fairing set street GP-T, Honda NSR250 MC18
€1,142.16
Kit, Fairing Set, GRP, (Street), MC18, GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NSR250. As well as bringing the MC18 up to date, it also offers huge weight saving and easy fitment and removal. Similar to a GP bike, the fairing is held on by R clips and nylon bungs for quick release. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing set BPFS-0157 which is made using GRP (glass reinforced plastic) which is primed and ready for paint**, we offer a similar product using carbon fiber panels finished in high gloss UV protective clearcoat. See BPFS-0159
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making minor adjustments before painting
TYGA no: BPFS-0157
SKU: hon-10626 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopRace airbox, ram air , Honda RVF400
€121.65
This race airbox has a larger and longer inlet than stock to allow for greater airflow and better breathing including ram air affect. Unlike other similar products available, as well as the modified inlet, this airbox increases the volume by 8% overstock for more stable performance. Uniquely, among aftermarket suppliers, the Tyga airboxes retain the correct profile on the base for an effective seal when installed just like the original airbox.
NOTE: This airbox will also fit the Honda VFR400, but you will need to shorten the airduct. Because of the cross beam on the frame is in a different position, it would hit the air duct at the front.
TYGA no: BPFX-9109
SKU: hon-10361 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Passenger seat cover T9, CBR400RR
€66.24
This stylish seat cover replaces the passenger seat pad on the NC23. Simply unbolt the original and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9027 only. Not for use with stock seat cowling.
Set pipe Full race system WSS300 (race), KTM RC390
€1,155.39
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0112
SKU: ktm-10147 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all models