Carbon front fender stock shape, Honda RS250R NXA
€227.52
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA step kit replacement left side Hanger, Hawk/Bros
€61.53
TYGA step kit replacement left side Hanger, Hawk/Bros
TYGA no: STAH-0013
SKU: hon-10926 Categories: ALL products, By model, Hawk/Bros 400/650, Honda, ShopHandlebar Clamp, Left, Black, 41 mm.
€93.45
Replacement left handlebar clamp for handlebar set TYLY-1077
Silencer aluminium round 43mm, Kawasaki ZXR250 2008 –
€216.12
Silencer, Aluminium, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0033
SKU: kaw-10021 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersTrottle cable A, Honda NSR250 MC21
€68.40
Throttle Cable A, MC21
TYGA no: 17910-kv3-830
SKU: hon-10706 Categories: ALL products, Honda, Honda OEM products, NSR250, NSR250 MC21, Various partsPower pack Boyesen/airbox/Powervalve, Suzuki RGV250 / Aprilia RS250
€979.92 €892.11
Power pack Boyesen/airbox/Powervalve, Suzuki RGV250 / Aprilia RS250
The perfect set voor that extra power and better throttle response.
Part shown in the picture are all parts that come with the set.
The RS250 has an extra cover for under the tank, this will fit both RS250 types.
RGV250 – picture 1 and 2
RS250 – picture 3 and 4
Airbox:
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
Powervalves:
et ( 4 pieces), complete CNC billet aluminium, RGV250/RS250 (alg-10123)
This set of Power valves is the latest version, and can be used for your Suzuki RGV250 or Aprilia RS250. Fully tested on Dyno and used on track and street bikes.
The set is made of CNC billet aluminium and is special coated.
No more problems with the “power valve pin” and having to buy new ones every 15.000 km.
And the risk that a broken power valve will ruin your engine!!
Power reeds:
Boyesen Power Reeds use a patented dual-stage fiberglass design for more airflow, more air velocity and more overall power.
TYGA no: power p002
SKU: alg-10242 Categories: ALL products, Aprilia, High performance, High performance, High performance, RGV250 VJ22, RS250, Suzuki RGV250Seal, Sw/Arm Bearing R., MC28
€6.08
Seal, Sw/Arm Bearing R., MC28
TYGA no: 91214-MR7-003
SKU: hon-11107 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Spring puller (type 1) , universal
€30.24
Handy, tough, spring puller ideal for removal of exhaust mounting springs in those difficult to get places. Say goodbye to slipping vice grips and twisted strands of wire.
Also gives your race pit a professional edge for that psychological advantage over the competition!
A must for every workshop!!
TYGA no: TYTO-0017
SKU: alg-10009 Categories: 2 stroke exhaust sets, 4 stroke exhaust sets, ALL products, By product, Cagiva, Exhausts, Exhausts, Honda, Mito 125, MSX125 2013 - 2015, MSX125SF 2016 -2020, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, Suzuki, Tools, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, Yamaha, YZ250 2005-15