Stay, Silencer, Yamaha R25/R3
€75.05
Stay, Silencer, Yamaha YZF-R25 and YZF-R3
Used on EXPS-0072, EXPS-0073 and EXPS-0074.
Two different length mounting bolts are provided to allow the stay to be fitted alone, or to be fitted with the passenger footrest over the top.
Front spacer wheel kit, fork conversion CBR600RR 05-06.
€36.64
Wheel, Front, Spacer Kit. ’05-’06 CBR600RR fork conversion.
These spacers are designed to allow the standard NSR250, NC30/35 front wheel to be used together with the ’05-’06 model CBR600RR forks when used with our CBR600RR triple clamp conversion.
Note that the upper/lower triple clamp bore dimensions are 48mm – 53mm.
The standard ’05-’06 axle shaft is too large a diameter to fit the NSR/NC wheel, so these spacer bushes are used to allow the use of the smaller axle shaft. The standard NSR250/NC30 shaft is a little too short, so we recommend using an RVF400 axle.
The NSR/NC disc mounting face is 100mm wide. The disc pitch, centerline to centerline of the rotors should be 138mm, and the discs 310mm in diameter.
RVF750R RC45 or NR750 discs can be used
TYGA no: TPER-0065
SKU: hon-10962 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsExhaust Stay, MC18, GP-T, Left, Assy.
€68.35
Exhaust Stay, MC18, GP-T, Left, Assy.
This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:
1 x TYLY-0198L for left
1 x TYLY-0198R for right
NSR250 1988 and 1989 MC18
TYGA no: TYLY-0198L
SKU: hon-10734 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC18Carbon end cap exhaust, Honda Monkey 125 2018
€158.99
Carbon end cap exhaust, Honda Monkey 125 2018
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7242
SKU: msx-10441 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopExhaustset race Stainless steel no Silencer, NC30 NC35
€883.63
Great looks and extra power!!
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
EXSL-0012 round carbon, EXSL-0013 Moto Maggot, EXSL0017 Oval Stainless, EXSL-0020 Oval Carbon, Short, and EXSL-0028 Oval Carbon Long
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0002
SKU: hon-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carbon radiator bracket MK2, Aprilia RS250
€61.22
Carbon radiator bracket MK2, Aprilia RS250 (apr-10081)
Nice carbon part, better looks for your bike and good replacement for that heavy steel one
TYGA no: 004704KT/P
SKU: apr-10081 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopUpper cowling Gp500 w carbon, Honda NSR250 MC21/MC28
€182.59
Upper Cowling (GRP), NSR250 GP500 Style
Be Michael Doohan! This upper cowling complete with carbon air scoops on the side is inspired by the NSR500 fairings from the late 1990s. Compatible with the MC21 and MC28, this fairing can either be used with stock Honda plastic side and lower fairings or the one peice TYGA Performance lower cowling, BPFL-0001. This product is to be used with a stock MC21/MC28 headlight, stock indicators and MC28 windscreen. It uses all stock mounting hardware and stock mirrors.
TYGA no: BPFU-0022
SKU: hon-10477 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, ShopSeat Panel, Right, Ebony, Ninja 250R 2008 -12
€55.10
Seat Panel, Right, Ebony, Ninja 250R 2008 -12
TYGA no: 36040-0115-H8
SKU: kaw-10200 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop