Exhaustset stainless steel, oval stainless steel silencer w carbon cap, Honda PCX150
€493.21
.Set, Pipe, Full Race System, Oval Stainless Silencer, Carbon End Cap, PCX150
This full race system has been specifically designed for the PCX150 to maximise power. Made in stainless steel with spring mounted carbon silencer with carbon end cap, this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a round carbon silencer with carbon end cap EXSL-00049
TYGA no: EXPS-0058
SKU: hon-10473 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, PCX150, ShopPainted Kit complete bodywork stock RR, “twin” Honda RVF400 NC35
€1,831.75
Seat Cowling, (GRP), NC30/NC35 GP-T
This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,
BPFS-0148 (GRP, NC30)
BPFS-0149 (GRP, NC35)
BPFS-0150 (Carbon, NC30)
BPFS-0151 (Carbon, NC35)
The advantages of this seat cowling over stock include:
– use with rest of seat cowling kit, much lighter than stock
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment
Tyga Performance Compatible Parts for this Product:
This product is compatible with:
BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T
TYLY-0133 Subframe, NC30/NC35 GP-T
TYLY-0130 Batterybox NC30/35 GP-T
BPFX-9234 Seat Support, NC30/NC35 GP-T
BPSP-0006 Seat Pad, GP-T
BPAC-0001 Rear Brake Reservoir Kit,
BPLT-0009 LED Taillight
BPFX-9133 Registration Plate Holder GP-T
TYGA no: BPFS-0211
SKU: hon-11393 Categories: ALL products, Bodywork, Bodywork and carbon, RVF400RR NC35Set pipe full race system WSS300 (no silencer), KTM RC390
€680.90
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0159
SKU: ktm-10197 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsTriple clamp set CNC black, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1244
SKU: hon-10620 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R
€12.23
Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R
Front wheel spacer kit aluminium, Honda NSR250 MC21/M28/NC30
€34.40
Replace the heavy steel front wheel spacers and wheel bearing distance spacer with these lightweight 6061-T6 aluminium spacers. At 35% of the weight of standard they’re just what you need for easier wheelies!
TYGA no: TPER-0024Â
SKU: hon-10395 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, VFR400RR NC30Seat set street GRP GP-T, Honda NSR250 MC28
€846.53
Kit, Seat Set, GRP (Street), MC28 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC28 GT-T seat cowling kits to choose from:
BPFS-0133 Street GRP
BPFS-0134 Race GRP
BPFS-0135 Street Carbon
BPFS-0136 Race Carbon
TYGA no: BPFS-0133
SKU: hon-10457 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopTool Set, Shaft Holder, 5~22mm
€95.74
This set includes three sizes of shaft holder. TYTO-0020, TYTO-0021 & TYTO-0022.
Securely hold 18 different size shafts from 5mm~22mm.
For specific information please see the description on the individual item.