Tube, Carbon, Round, 83mm x 350mm
€106.11
made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications
Handle bar set racing “hinge type” black, KTM RC125/RC200/RC390 2022-
€247.11
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1531
SKU: ktm-10215 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon tail light cover TYGA, Aprilia RS250
€45.19
Cover, Carbon,Tail Light TYGA Aprilia RS250
This cover is made specifically for the TYGA Carbon , Race bodywork kit (BPFS-0167) Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPCX-9530
SKU: apr-10088 Categories: ALL products, Aprilia, Bodywork, Bodywork and carbon, RS250Tank shrouds (grp) black with duct and grill, Honda MSX125 GROM
€147.50 €104.00
Tank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom, Asteroid Black. Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of the bike show carbon version of this product (BPCX-7828) installed.
TYGA no: BPFX-7828 B
SKU: MSX-10286 Categories: ALL products, Honda, MSX125 2013 - 2015, Shop, Various partsHolder, Fork, 52mm
€35.93
This 52mm fork holding tool is very useful when servicing 41mm forks. Now there’s no need for alloy jaws in your vice and less chance of crushing a fork leg.
This handy tool just slips over the stanchion, secures with an M8 cap head bolt and then can be held firmly in the vice while you painlessly perform your maintenance.
Manufactured from 6063 aluminium to ensure no damage to your motorcycle parts in normal use
Side cover left black, Honda MSX125 GROM
€39.31
SIDE COVER LEFT BLACK, HONDA MSX125 GROM
Carbon chain guard set, Honda CBR250RR MC22
€139.66
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7210
SKU: hon-11464 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersTank shrouds (grp) yellow with duct and grill, Honda MSX125 GROM
€147.50 €104.00
ank Shrouds, With Duct and Grille, (Pair), (GRP), MSX125 Grom. Y-217 Queen Bee Yellow Painted to match your bike. Looks cool and makes your bike stand out from the crowd.
Pictures of bike show carbon version of this product (BPCX-7828) installed.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFX-7828 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
TYGA no: BPFX-7828 Y
SKU: MSX-10218 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop