Set exhaust pipe stainless steel silencer with carbon cap , Yamaha R25/R3
€897.95
Set, Exhaust Pipe, Race System, Yamaha YZF-R25 and YZF-R3, Stainless, Stainless Silencer, Carbon End cap
This race system has been specifically developed for the Yamaha YZF R25 and YZF R3 and has been designed for optimum performance. It uses a stainless oval silencer with carbon end cap to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatiblity
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
No modification of bodywork is required, however, the emission canister must be relocated using the clamp provided.
Please also see EXPS-0073 EXPS-0074 and EXPS-0075 for similar system.
Performance and Dynograph
Please refer to dynographs
A) All Standard.
The standard exhaust system is replaced with the TYGA system. No modifications to the engine or fuelling were performed. Fitting a fuel controller could further increase the performance gains.
B) Airfilter/Airbox modification.
The standard exhaust system is replaced with the TYGA system. The airbox cover has been removed and a high flow filter fitted. This improves power all through the range. Fitting a fuel controller could further increase the performance gains.
TYGA no: EXPS-0072
SKU: yam-10059 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Carb Service Kit A, 40 pieces, Honda RVF400 NC35
€81.81
Carb Service Kit A, 20 pieces, Honda RVF400 NC35
LiteTek Carburettor Seal Kit to suit: Honda RVF400 NC35
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-002 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MR8-900)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x OR-011 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
TYGA no: CK-Honda-NC35
SKU: alg-10351 Categories: ALL products, Carburettor Service Kits,, Honda, RVF400RR NC35, Shop, Various partsTop End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
€179.12
Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-9312R
SKU: hon-10718 Categories: ALL products, Bodykit replacement parts, Bodykit replacement partsFront cowling street RC211V TE3, NC30 NC35
€141.68
This products is a replacement part for bodywork sets BPFS-0019, BPFS-0032 and BPFS-0033
TYGA no: BPFU-9023F
SKU: hon-10096 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC29, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set, Pipe, Slip On, Round Aluminium Silencer, Ninja 250
€253.47
Made in stainless steel with spring mounted aluminium silencer, this system significantly increases performance, saves weight and gives the best bang for the buck! (May not comply with noise regulations for some states and territories)
This system is supplied with a round aluminium silencer EXSL-0033
Screen GP-T, Honda NSR250 MC21/MC28
€52.00
Screen GP-T, Honda NSR250 MC21/MC28
This screen fits the TYGA bodywork
TYGA no: SCRE-0161- SCRE-0162
SKU: hon-10534-hon-10546 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28Seat Support, GRP, RS250R NX5
€100.33
Seat Support, GRP, RS250R NX5
For use with seat cowling BPFT-9036 and BPCF-9036
TYGA no: BPFX-9036
SKU: hon-10978 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop