TYGA stepkit replacement right side hanger mount (adj), Ninja 400
€80.30
TYGA Step kit Replacement Right Side Hanger Mount (Adj) Ninja 400, Assy
Exhaust Chamber, Left, Side By Side Type, MC21/28
€349.54
This is the bare left side replacement chamber for EXCS-0005
Handlebar MiniRacerXtreme, Honda MSX125 GROM
€3.09
Handlebar, MiniRacerXtreme, MSX125 Grom
TYGA no: TYLY-1105HB
SKU: MSX-10254 Categories: ALL products, By model, Honda, MRX, MRX, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon front fender, Honda CBR1000 2008-13
€217.69
Lightweight carbon fibre direct replacement for Honda OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Update your bike with this great carbon product, direct replacement of the original part
TYGA no: BPCF-7101
SKU: hon-10060 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopSeat set street carbon GP-T, Honda NSR250 MC28
€1,438.61
Kit, Seat Set, Carbon (Street), MC28 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Street Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC28 but also an MC21 fitted with an MC28 fuel tank. The kit comprises parts shown below which are also available separately.
Note there are 4 MC28 GT-T seat cowling kits to choose from:
BPFS-0133 Street GRP
BPFS-0134 Race GRP
BPFS-0135 Street Carbon
BPFS-0136 Race Carbon
TYGA no: BPFS-0135
SKU: hon-10453 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC28, ShopSilencer aluminium round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Aluminium/Carbon End Cap, Round, 2 x 380 mm., Assy.
This silencer has a tough anodized aluminium tube and carbon exit cap for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0140
SKU: alg-10136 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97Carbon rear hugger, Honda VTR1000 Sp1
€203.90
This stylish lightweight carbon hugger fits on the SP1 swing arm preventing rain and road dirt from reaching the rear suspension which can cause damage and corrosion. The hugger fits using existing mounting points on the stock swing arm and a strip of very strong 3M double sided tape provided.
Please note that due to manufacturing tolerances between individual bikes, there is some difference in the exact mounting location from one bike to another. We recommend the use of silicone sealant to ensure a secure fit and prevention of damage to surface of swing arm.
This product is not suitable for the SP2 which uses a different shaped swing arm. For SP2, see product BPCH-7020
Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers