Lower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Carbon exhaust guard left, KTM RC390
€100.33
Exhaust Guard, Left, Carbon, KTM RC390 Serpent
This is not a simple cover, but a thick and very strong carbon part. Looks cool but also made to guard you, not getting burned by the silencers.
Carbon Exhaust guard for the TYGA serpent exhaust systems. This product is used to when the passenger footpeg assembly has been removed and a TYGA Performance underseat exhaust installed.
Compatible with the following TYGA exhaust systems:
EXPS-0061
EXPS-0062
TYGA no: BPCC-0021L
SKU: ktm-10061 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Exhausts, KTM, RC 390, ShopDowel, Cylinder, MC28
€1.82
Dowel, Cylinder, MC28
TYGA no: 94301-10160
SKU: hon-11097 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Lower Cowling (Carbon), NC35, GP-T, Assy.
€473.74
Lower Cowling (Carbon), NC35 GP-T, Assy.
This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0147
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC35, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9134.
Compatible products:
This product must be used with BPCU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPCL-9134
SKU: hon-10762 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Section, Secondary B, R.H Exit, VFR750F, 3rd Gen, 90-93
€107.88
TYGA no: EXPT-8151
SKU: hon-11343 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Front fender RC211V, NC23 NC29 NC30
€71.75
ttaches to the original mounting points and can be used with all Tyga and Honda bodywork. Suitable for NC30, NC29 and NC23 models
Compatible Parts:
All Tyga Performance and Honda OEM panels.
TYGA no: BPFF-9002
SKU: hon-10072 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30Carbon hugger, Ducati monster 796/1100
€118.51
Hugger, (Carbon), Ducati Monster, 796, 1100
Exhaust bracket, Honda RS250R NX5
€13.68
Exhaust bracket, Honda RS250R NX5
TYGA no: BPSY-0214
SKU: hon-10900 Categories: ALL products, CNC parts, Exhaust, Honda, RS250R NF5 / NX5, Shop