Lower cowling GP-T, Honda VFR400 NC30
€216.35
Lower Cowling (GRP), NC30 GP-T, Assy.
This product is designed to be used with BPFU-9034 as part of the Bodywork set BPFS-0144
.
Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9034.
Compatible products:
This product must be used with BPFU-9034
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:
1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.
2. Tyga exhaust can be installed with no modification
3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.
TYGA no: BPFL-9034
SKU: hon-10599 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, VFR400RR NC30Carbon tankcover rear RVF, NC35
€395.36
This carbon cover fits over the stock NC35 tank in minutes. Ideal for covering damaged tanks or for completing the ful carbon body work makeover.
TYGA no: BPCX-9201
SKU: hon-10144 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopLower Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
€382.54
Lower Cowling, Race, Carbon Unpolished KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFL-7531 (GRP)
BPCL-7531 (Carbon Clearcoated)
Set, mirror blanking plates L&R CNC black, KTM RC series
€57.41
Wheel, Aluminium Spacer Kit, KTM Duke – RC Series
Update your bike with this great TYGA performance, KTM power part!!
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: This product is only sold as a complete kit, and individual items are not available separately, sorry.
TYGA no: TYLY-1185
SKU: ktm-10191 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 390 2017 -, KTM, RC 125/200, RC 390, Shop, Various partsRacing stepkit silver/RED adjustable, Honda Monkey 2018
€477.27 €395.87
Racing Rear Set Kit, Adjustable, Monkey 125
With all major components designed specifically for the Monkey 125 in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners, new OEM Honda axle bolt and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items.
Notes:
No real brake light provision. If required, we recommend installation of inline pressure switch.
Fitting this rear set requires replacing the axle bolt with a slightly longer one, a new orginal OEM honda axle bolt is included
This rear set cannot be used in a reverse (GP) shift pattern
TYGA no: STAA-0027RED
SKU: msx-10416 Categories: ALL products, CNC parts, Honda, Monkey 125 2018-, ShopSeat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Silencer stainless round, WSS300 (street) system, KTM RC390
€384.78
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXSL-0074p
SKU: ktm-10145 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsCarbon fairing set race, Aprilia RS250
€1,396.31
Due to popular demand, our GP front fairing kit is now available in carbon race version. These panels are both lighter and stronger than GRP. Finished in three layers of tough clear coat to protect against UV light, they are ready to use and don’t require painting.* This kit comprises of the parts shown in the picture which are also available separately.
*Please note, does not include seat cowling kit which can be ordered code BPFS-1102. Graphics shown in photos are not included.
For Aprilia RS250 MK1 owners, you can use this fairing but it’s not a direct fit.
The dash is different, the digital meters (MK2) fits the TYGA frame.
Tank MK1 looks the same but is little different. The seat needs adjustment the tank is a little bigger.
The cooling- and oil tank are in the sub frame (MK1) and on the side of the frame MK2.
The steps left and right of the MK2 have extra brackets, the MK1 don’t have these. You need them to fit the lower TYGA cowling.
TYGA no: BPFS-0167
SKU: apr-10086 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, Shop