Upper /mirror stay RC36-2, RC36-2 RC30 style
€212.39
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0305
SKU: hon-11457 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon rear hugger, KTM RC125/RC200/RC390 2022-
€113.63
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCH-7031B
SKU: ktm-10206 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsTank filler, keyless racing, Honda MSX125SF- 2021 / Monkey125 2018-
€69.87
Tank Filler Cap, Keyless, Racing Type, Honda Monkey125, MSX125SF/Grom
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware ( 3x M4x25 screw) it can be installed in minutes.
Suitable for the following models
* Honda Monkey 125 2018-onwards
* Honda MSX125SF (2nd Generation) Grom 2016-onwards
TYGA no: TYLY-1221
SKU: msx-10460 Categories: ALL products, CNC parts, CNC parts, Exhausts, Honda, Monkey 125 2018-, MSX125 2021-, MSX125 GROM, MSX125SF 2016 -2020, Shop, Various parts, Various parts, Various partsUpper cowling set GRP endurance , Honda RVF400 NC35
€327.07
This endurance upper cowling is a direct replacement for the stock Honda upper cowling and side inspection covers. This Suzuka 8 Hour inspired fairing is supplied with four headlight covers, two blanking ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC35 headlight and mounts to the bike in the same way as the Honda part including mirror stay, meter stay, mirrors, air duct, indicators etc. It can be used either with the TYGA lower cowling BPFL-0103, or can be used with stock Honda NC35 lower and inner cowling too. We also supply this product painted in RR and RT colours ready to install. See our product list for the painted versions.
The windscreen is not included. Please order one of the following windscreens:
SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132
Note: some photos show the painted RR set ( BPFS-0153)
TYGA no: BPFS-0153
SKU: hon-10640 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Upper cowling race, Aprilia RS250 Tyga, assy
€243.41
This upper cowling is to be used in our Aprilia RS-250 kit, BPFS-0101.
This product is compatible with lower cowling BPFL-9030. Will not fit stock Aprilia lower cowling
TYGA no: BPFU-9130
SKU: apr-10047 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shopkey holder CNC silver, Honda NSR250 MC18/MC21/MC28
€121.39
Ignition Switch Holder, CNC Silver, NSR250
This is a removable ignition switch/lock holder for our NSR triple clamp. Can be ordered as part of a triple clamp set or by itself or to fit to our TYGA triple clamps TYLY-0041 and TYLY-1041
TYGA no: TYLY-0141Â
SKU: hon-10268 Categories: ALL products, By model, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopCarbon seat set, Honda VTR1000 SP1/SP2
€838.70
This set comprises the TYGA carbon seat cowling and luggage compartment lid. Made to the same dimensions as the original Honda item, this product is easy to fit and will enhance your bike’s looks as well as be stronger and lighter than the parts they replace.
Beautiful, perfect fitment and gives your bike that HRC look.
Racing stepkit silver/SILVER adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, silver with SILVER Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-0019SILVER
SKU: MSX-10245 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps