Meter assy, Honda MSX125 GROM
€209.52
Meter Assy.
TYGA no: 37100-K26-901
SKU: MSX-10010 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFront fender stock shape, Honda NC23,NC29,NC30
€78.53
Front Fender, Carbon, NC23,NC29, NC30, Stock Shape
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPFF-0005
SKU: hon-11320 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, CBR400RR NC23, CBR400RR NC29, Hawk/Bros 400/650, Honda, Shop, VFR400RR NC30Exhaust section Mesh slip on 50mm
€92.22
Section, Mesh Slip-On, Stainless, Yamaha YZF-R25 and YZF-R3
For use with EXPS-0069 only.
The Slip joint is 2 internal, and can also be fitted to any 2 pipe
TYGA no: EXSl-0014
SKU: yam-10063 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Yamaha, YZF-R25/R3Carbon front fender stock shape, Honda RS250R NXA
€227.52
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
lower cowling stock shape closed bottom , Honda RFV400 NC35
€180.47
Race one piece lower cowling with oil catch tank. Direct replacement for OEM Honda lower left, right and inner cowls. Can be used with most of our range of upper cowlings.
TYGA no: BPFL-0106
SKU: hon-10710 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35GPS blank plug, NSR250
€14.99
Replaces Gear Position Sensor for race use. Secure with liquid gasket such as Three Bond 1104. Must be used with TYLY-0015 Plug holder
Compatible products
TYLY-0015 Plug holder
TYGA no: tyly-0014
SKU: hon-10421 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopIndicator, Rear, Right, Ninja 250R 2008 -12
€35.39
Indicator, Rear, Right, Ninja 250R 2008 -12
TYGA no: 23037-0118
SKU: kaw-10218 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopUndertray street GRP GP-T, Honda NSR250 MC21/MC28
€75.27
Undertray, Street, (GRP), NSR250 GP-T
This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings
Also to be used with BPFX-9133 Registration Plate Holder GP-T.
Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28
BPFX-9033 Undertray Street GRP
BPCX-9033 Undertray Street Carbon
BPFX-9333 Undertray Race GRP
BPCX-9333 Undertray Race Carbon
TYGA no: BPFX-9033
SKU: hon-10469 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, NSR250 MC21, NSR250 MC28, Shop