Carburettor, 4 way tubing joint (cross type)
€35.04
Carburettor, 4 way tubing joint (cross type)
Carburettor tubing joint used on the NSR250 MC21
TYGA no: 16181-kv3-830
SKU: hon-11235 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Temp gauge race, universal
€17.20
Temp Gauge, Race, Universal
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
No adapter has been fitted, so this must be configured to your own application using the fittings of your choice.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
TYGA no: TELC-0005
SKU: alg-10325 Categories: 848 / 1098 / 1198, ALL products, Aprilia, By model, Cagiva, Desmosedici RR, Ducati, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, KTM, Mito 125, Monster, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, Shop, Suzuki, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3Carbon Meter Cover RGV250 VJ21
€31.39
Carbon Meter Cover RGV250 VJ21
Attractive carbon cover for Suzuki VJ21 RGV250 meter assembly.
For fitment, push it over the instruments on one side until the foam compresses a little, you will then notice that the cover will then slide freely in towards the centre of instrument a couple of mm, allowing you more slack so you can locate it on the opposite side of the instrument. You need to locate over both rev counter and temp gauge at the same time. Once in position and properly located, you will notice it will slide around somewhat so, pick out the backing tape and the adhesive will hold it into desired position on the foam instrument surround. Alternatively, remove backing before installation but be careful not to lose adhesion or let cover get stuck in wrong position before you are satisfied it is properly located.
Fits all VJ21 Models
TYGA no: BPCC-0055
SKU: suz-10135 Categories: ALL products, RGV250 VJ21, Shop, Suzuki, Various partsSeat cowling (grp) stock shape, Honda NSR250 MC21
€234.42
This seat cowling is designed for the classic racers out there or competing in classes where you need to keep the stock silhouette. It is a full-on race version with the seat area covered over for maximum rider feedback when on the limit. only available as race version, no street version with light provision.
TYGA no: BPFT-0001
SKU: hon-10444 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC21, ShopTyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
€442.35
Kit, Seat Set, GRP, (Street), MC21, MC28, NSR250V
Modelled closely from the seat cowling taken off an actual NSR500V HRC factory machine, this seat cowling kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but in proportion to the NSR250. This seat cowling set can be installed with both the MC28 and the MC21, (though to fit it on a MC21 you will need an MC28 fuel tank or TYGA Fuel tank BPCG-0001 or BPFG-0001). The set consists of the parts shown below and has a taillight for street use and special mounting hardware and seat pad provided.
We have designed the seat cowling so that for fuel tank removal, there is no need to remove the seat cowling, making for quick and easy jet changes and maintenance etc. Note, you do not need to change the subframe for either the MC21 or MC28 models to install this seat cowling which bolts to the stock subframe holes at the rear and special front lower subframe mounting positions with all hardware provided. The seat cowling has threaded holes in the underside to attach exhaust stays TYLY-0243L and TYLY-0243R for use with NSR250V exhaust system EXCS-0047
We recommend installing this seat cowling set with fairing set BPFS-0195 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0196
SKU: hon-11059 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon tank cover, Honda CBR125/CBR150 2007-10
€98.58
Stock shape. Replaces original cheap nasty plastic cover on latest generation CBR125 (2007 on). This real carbon tank cover makes a huge improvement to the overall appearance and quality of the CBR.
TYGA no: BPCX-7018
SKU: hon-10274 Categories: ALL products, Carbon, CBR125R/CBR150R 2004-10, Honda, ShopCarbon front brake reservoir stay, Honda NSR250
€36.48
Replacement for tired the stock front brake resevoir stay. This trick carbon stay can be used as a direct replacement for the heavy steel one on the NSR250. It weighs about 25% of the original and as well as being stiff and strong, looks like it belongs on a GP bike.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCC-9015
SKU: hon-10408 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop