Carbon race airbox MK1/MK2, Aprilia RS250
€451.00 €412.40
Carbon race airbox MK2, Aprilia RS250 (apr-10079)
Our race airbox is inspired by the GP road racing technology, taking advantage of a front air intake and all available space within the engine compartment.
And by using the lower part of the fuel tank as closing to increase the volumetric capacity of which becomes 9.5 lt against 6.2 lt of the standard component ( 53%).
The air intake (Snorkel) is positioned in the front to be able to suck a greater amount of air and with less turbulence than the positioning adopted in origin ( in the back)
Its shape also was designed using the calculation FEM (Finite Element Method) to minimize the load losses and therefore increase performance in the complete range of the RPM.
The kit also includes a carbon cover to be mounted close to the air intake to prevent suction of hot air.
All this is mainly reflected in an increase in engine performance, as shown below on the Dyno graph.
Greater maximum power ( 3 hp *)
Better throttle response
Higher max. RPM ( 500 rpm)
A GP “sound”
Improved access for maintenance
Jets #310 – #320(*)
Also be using Carbon you will have weight reduction of around 50% (465 grams compared to 970 grams OEM).
The filter is washable and gives better performance then original
The best aftermarket race airbox in the market, order with confidence.
* Standard engine
Please note, the rubber airbox manifolds are not with the airbox. You have the reuse the original ones.
TYGA no: 004800KT/P.
SKU: apr-10079 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, High performance, RS250, ShopCarbon tank support Dax
€85.28
Tank Support, Carbon, Honda Dax, Stock Shape
TYGA no: BPCX-7237
SKU: MKY-004 Categories: ALL products, By model, By product, Carbon, Dax and Chaly, Honda, ShopTYGA step kit replacement link rod 205mm, Y
€16.07
Tyga Step Kit Replacement Link Rod, Male, 205 mm.
Replacement gear link rod for your TYGA Step Kit. (Check application before ordering)
Uses M6x1 thread in one end and M6x1 L/H thread in the other, and includes both the nuts. 205 mm. in length.
TYGA no: STAR-0006
SKU: yam-10054 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all models, Yamaha, YZF-R25/R3Lower triple clamp CNC black, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Black, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-1742, Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35.
TYGA no: TYLY-1942
SKU: hon-10550 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, Stock list, all modelsSide Cowling, Left, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, left, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Tail light, CBR400RR
€57.20
Provides ample illumination for brake and taillight functions. Ready to plug in. No registration illumination and may not be legal in some markets
Tyga Step Kit Replacement Bush, (Pair), 20mm
€12.44
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0020
SKU: ktm-10124 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsScreen clear TYGA style, Ninja 400 kit
€52.00
Screen Clear, TYGA style, Ninja 400, Kit
Note this windscreen is not suitable for stock Kawasaki bodywork and will only fit TYGA Performance race upper BPFU-7040 in bodywork set BPFS-0175
Screen fasteners are supplied with this product.
See also SCRE-0170 Screen Tint
TYGA no: SCRE-0169
SKU: kaw-10137 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-