Exhaustset race Stainless steel no Silencer, NC30 NC35
€883.63
Great looks and extra power!!
Exhaustset race Stainless steel no Silencer, NC30 NC35
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inch internal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
EXSL-0012 round carbon, EXSL-0013 Moto Maggot, EXSL0017 Oval Stainless, EXSL-0020 Oval Carbon, Short, and EXSL-0028 Oval Carbon Long
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0002
SKU: hon-10098 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30TYGA bike dust cover two tone red/black Race, Gp125/moto3
€65.05
TYGA Bike Dust Cover, Red/Black, DUCATI
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
TYGA no: TMER-0160
SKU: alg-10415 Categories: ALL products, Bike covers, By model, Merchandise, Shop, Universal partsCarbon fork guard right, Honda Monkey 125 2018-
€84.32
Carbon fork guard right, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCC-7042R
SKU: msx-10434 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopSection, Header, Rear Left, Stainless, VFR750F, 3rd Gen, 90-93
€122.86
TYGA no: EXPT-3151
SKU: hon-11345 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Upper Cowling Race (GRP), NC30/NC35, GP-T, Assy.
€317.01
Upper Cowling, Race (GRP), NC30/NC35, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NC30 and NC35 a contemporary look. Together with lower cowling BPFL-9034 for NC30 and BPFL-9134 for NC35 and other mounting hardware it comprises race sets BPFS-0163 for the NC30 and BPFS-0164 for the NC35.
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9034 and BPFL-9134 Lower Cowling
TYLY-0138 (NC30) and TYLY-0139 (NC35) Upper Stay
TYLY-0187 (NC30) and TYLY-0188 (NC35) Front Stay
TYLY-0189 (NC30) and TYLY-0190 (NC35) Side Stays
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9134
SKU: hon-10725 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, RVF400RR NC35Rubber shield head Light, Honda VFR400 NC30
€17.72
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPAC-0016
SKU: hon-11397 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, Various parts, VFR400RR NC30Set pipe full system with carbon oval silencer, Honda Monkey 125 2018-
€413.39
Set, Pipe, Full Race System, High Level, Monkey 125, Carbon Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Stainless Oval High level System for Honda Monkey 125
Triple clamp set CNC black, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1244
SKU: hon-10620 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30