Steering stopper, NSR250 MC21/MC28
€20.02
Steering stopper for race use. Reduces degree of movement in steering. Easy to attatch using hole for brake hose clamp on triple clamp.
TYGA no: TPER-0012
SKU: hon-10368 Categories: ALL products, Bodywork, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsStay oval silencer, Honda MSX125SF GROM
€20.41
Stay, Silencer, High Level Exhaust, MSX125
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhausts:
EXPS-0066 Set, Pipe, Full Race system, MSX125SF Grom, Carbon Oval/Carbon End Cap
EXPS-0067 Set, Pipe, Full Race system, MSX125SF Grom, Stainless Oval/Carbon End Cap
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0175 which has the mounting holes further forward and is used with our Maggot full race system EXPS-0065.
TYGA no: BPSY-0177
SKU: MSX-10341 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopStep kit replacement left side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement left Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0047B
SKU: KTM-10089 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390Top Triple Clamp, CNC Black, NC35 Forks/NC30 Shaft
€196.92
Top Triple Clamp, CNC Black, NC35 Forks/NC30 Shaft
CNC designed and manufactured in house. Facilitates mounting holes for securing the ignition switch holder assy TYLY-1144
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
Bracket front brake CNC black 84mm Brembo, Kawasaki Z125
€45.19
Bracket, Front Brake, 84mm Brembo Conversion, Black, Kawasaki Z125
This is to fit the 84mm pitch rear caliper.
Also available in silver (TYLY-0134)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA stepkit replacement left side hanger mount (adj), Ninja 400
€80.30
TYGA Step kit Replacement Left Side Hanger Mount (Adj) Ninja 400, Assy
Gasket, Clutch Cover, Ninja 250R 2008 -12
€11.80
Gasket, Clutch Cover, Ninja 250R 2008 -12
TYGA no: 11009-1872
SKU: kaw-10225 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.