Handle bar tube TYGA,
€22.89
Handlebar Tube (Assy), Black. Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm).
Comes fitted with plastic bungs in each end.
Under cowling (GRP) Black, Honda MSX125 GROM
€182.13
Under Cowl, (GRP), MSX125, painted asteroid black metallic to match your bike. Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. We also offer the same product in Carbon, see BPCL-7028.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: BPFL-7028 B
SKU: MSX-10142 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopCarbon airducts (pair) gloss , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110
SKU: hon-11462 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersKit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopDecal set, type 8 pearl white scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 8, 2015 Pearl Himalaya White Scheme This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026V
SKU: MSX-10315 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSeal Gap, Universal (airbox) 100cm
€6.69
Exhaust Valve Bottle Holder, RGV250 VJ21/VJ22
In house designed and 3D printed with excellent strength and durability this exhaust valve bottle holder is the perfect solution to securely fit the exhaust valve bottle to the frame.
For exhaust valve bottle see BPAC-0011
TYGA no: BPAC-0012
SKU: alg-10404 Categories: ALL products, Aprilia, Bodywork and carbon, Honda, NSR125 JC22 1994 - 2003, NSR250, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, RSV125, RVF400RR NC35, Shop, Suzuki, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, VFR400RR NC30, VFR750F Gen 3 90-93Carbon exhaust guard, Honda Monkey 125 2018-
€93.94
Exhaust Guard, Carbon, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7042
SKU: msx-10428 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, Shop