Fairing set race stock shape, Honda NSR250 MC21
€674.07
This kit comprises of parts below.
Upper Fairing
Lower Fairing
Seat Fairing
Front Fender
Screen
The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.
Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
Delivered in white primer
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0112
SKU: hon-10356 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, ShopCarbon workshop trays 300x200x1,2 , carbon/carbon
€62.63
Carbon/Carbon Workshop Tray 300x200x1.2 mm
Used by factory teams all over the world , Motogp, MXGP or F1.
Using high end automotive and aerospace technology, this useful and beautiful tray will be the envy of all your friends and racing competitors and we promise that it will become an essential and indispensable part of your tool kit, as it has ours! The tray is both lightweight and extremely strong due to the method of construction and the materials used. Using a balance of craftsmanship and technology, each tray is individually laminated by skilled workers in a precision aluminium mold where it is subjected to high pressure to give unrivalled crisp and sharp finish which is both chemical and abrasion resistant.
We have been testing these trays for several months now and given them no mercy. We’ve put brake fluid, carburetor cleaner, engine oil, gasoline and other nasty fluids in them and they have retained both their strength and beautiful sheen. We have used them to hold various motorcycle parts and tools and apart from minor surface scratching which is to be expected, the hard epoxy finish has proven to be extremely tough and durable, but forgiving enough not to damage any delicate parts.
Of course, like all trays, these can be used around the home for drinks, fruit bowl and other decorations. If you have an application or require a similar product in large quantities, please contact us and we will be happy to discuss all details including design through to manufacturing and delivery.
These trays are easily stackable and weigh only 240 grams
We offer four variations of the tray in different configurations of carbon and Kevlar to suit your personal tastes:
TYTO-0004A Carbon/Carbon
TYTO-0004B Kevlar/Kevlar
TYTO0004C Kevlar/Carbon
TYTO-0004D Carbon/Kevlar
TYGA no: TYTO-0004A
SKU: alg-10265 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Bodywork and carbon, By product, Cagiva, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Dax and Chaly, Desmosedici RR, Ducati, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, ER6N-F 2009-11, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Hawk/Bros 400/650, Honda, Honda MX, Husqvarna MX, Kawasaki, Kawasaki MX, KSR110 2005- 10, KTM, KTM MX, Mito 125, Monkey 125 2018-, Monster, Motocross, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, NR750, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, PCX150, RC 125/200, RC 390, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, RVF750 RC45, Suzuki, Suzuki MX, Suzuki RGV250, Universal parts, V-Max 1985 - 2007, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, Yamaha MX, YZ250 2005-15, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3, Z125 2016-, ZX10R 2011 -15, ZXR250C, ZXR400LFuel tank (Ram air), Honda RS250R NX5
€1,321.68
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFG-0002
SKU: hon-11445 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSilencer kevlar/carbon 2 stroke 32MM
€191.76
This high quality lightweight silencer is made from CNC machined end caps joined by a carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Fits onto 31.75mm (1 1/4 ) pipe, and is supplied with a 3 hole mounting flange to be welded to existing pipe.
Meterstay aluminium Race , Honda VFR400 NC30
€202.46
Meter Stay, NC30, Race, Stock Type, Assy
This meter stay to be used with all stock shaped bodywork. It is the same dimensions as Honda part 64501-MR8-000 and TYGA part TYLY-0016 but is designed with track use in mind . Made from aluminium and designed without any headlight mounts, this simple and lightweight stay is suitable for race and track day applications.
Compatible with stock Honda NC30 bodywork and TYGA parts BPFU-1021 and BPFS-0139
TYGA no: TYLY-0250
SKU: hon-11215 Categories: ALL products, Honda, Shop, Various parts, VFR400RR NC30Tyga Step Kit Replacement Bush, (Pair), 20mm
€12.44
This replacement part fits to the Tyga step kit on the KTM RC390 etc.
TYGA no: STHB-0020
SKU: ktm-10124 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RC390 2022-, Stock list, all modelsWater pump shaft/gear, Honda NSR250 MC28
€255.37
Water Pump Shaft/Gear, MC28
High quality hard anodized aluminium gear, on precision ground shaft.
Manufactured by T2 Racing in Japan.
Direct replacement for the standard plastic shaft/gear which is prone to cracking and causing catastrophic failure.
The shaft and gear can be disassembled should any parts ever need replacing.
Note that this part is for MC28 only. For MC18 and MC21 please see TPER-5003
TYGA no: TPER-5004
SKU: hon-10623 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various partsMount stay, VFR750F gen 4, 94-97
€14.94
Mount stay, VFR750F gen 4, 94-97
Mount stay, VFR750F used on:
EXPS-0119 Set, Pipe, Full Race System, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
TYGA no: EXMS-0119
SKU: hon-11032 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97