Triple clamp set CNC black, Honda CBR250 MC22 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 48 mm / 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks on the lower clamp, please change options below)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-1012 when installing this triple clamp set for best clearance issue with the CBR250RR clocks and fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1230
SKU: hon-11230 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersRC Valve Cable B, MC28
€16.13
RC Valve Cable B, MC28
TYGA no: 14332-KV3-830
SKU: hon-11173 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28TYGA bike dust cover two tone Red/white, Honda VF1000R
€85.76
TYGA Bike Dust Cover, Red/White, Honda VF1000R
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.
This Red/White Honda VF1000R cover is exclusively made by TYGA-Performance on special request for members of the Honda VF1000R Facebook group and is now available on pre order.
Covers will ship starting from October 2019
Limited production so Pre-Order you VF1000R cover now!
TYGA no: TMER-0118
SKU: alg-10321 Categories: ALL products, Bike covers, Merchandise, Shop, Universal partsCarb Service Kit A, 20 pieces, Honda CBR400RR NC29
€40.95
Carb Service Kit A, 20 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-012 Float Bowl Ring, Material: Flourosilicone, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
4x OR-006 Needle O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16010-MV4-780)
TYGA no: CKA-Honda-NC29
SKU: alg-10356 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaTyga Step Kit Replacement Toe Piece, Black, Assy.
€14.83
Replacement toe piece for your TYGA Step Kit.
Can also be used for fitting to almost any standard foot control lever to replace bent and damaged part by simply drilling a 6.3mm hole and countersinking on the back side of the lever.
Use Loctite to secure.
Comes with mounting bolt.
Set pipe slip on carbon oval with cap, CBR500
€504.96
.Set, Pipe, Slip On, CBR500, Carbon Oval/Carbon End CapMade in stainless steel with spring mounted carbon silencer, and precision made CNC machined end cap. (May not comply with noise regulations for some states and territories)This system is supplied with a carbon silencer EXSL-0043<iframe width= 560 height= 315 src= https://www.youtube.com/embed/CTgM0wCAvfg frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0045Â
SKU: hon-10327 Categories: 4 stroke exhaust sets, ALL products, CBR500R, Exhausts, Honda, ShopSpacer left side hanger mount, Ninja 400
€3.56
Spacer, Left Side Hanger Mount, Ninja 400
Exhaust valve bottle holder ( 1/2″ round tube mount),
€9.15
Exhaust Valve Bottle Holder, RGV250 VJ21/VJ22
In house designed and 3D printed with excellent strength and durability this exhaust valve bottle holder is the perfect solution to securely fit the exhaust valve bottle to the frame.
For exhaust valve bottle see BPAC-0011
TYGA no: BPCX-0023
SKU: alg-10402 Categories: ALL products, Aprilia, Bodywork and carbon, Honda, RC36-2 -> RC30 replica products, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS250, Shop, Suzuki, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, VFR750F Gen 3 90-93