Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
€54.27
Clutch Lever TYGA CNC flip up , KTM Duke – RC125/RC200/RC390
CNC machined from solid billet, these flip up type levers are made to a very high standard.
Not to much bling, and the orange color matches your KTM RC series good quality and adjustable in reach and length.
Fits’s in minutes and changes the appearance of your KTM!
TYGA no: LEVC-7003
SKU: ktm-10077 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-Lower Triple Clamp, CNC Black, RVF400 forks/NSR shaft
€367.66
CNC machined TYGA lower triple clamp for your NSR250 to take RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set:
TYLY-1541Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
TYLY-1741Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
Luggage box, GRP RC36-2, RC30 Style
€185.95
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFX-7249
SKU: hon-11529 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSilencer stay, RC36-2 RC30 style
€31.40
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0313
SKU: hon-11454 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSection, Final, Stainless, Yamaha R25/R3
€147.90
Section, Final, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Vibe Rubber
€12.29
Vibe Rubber. Suitable for the following models:
BPFS-0012
BPFS-0013
BPFS-0014
BPFS-0019
BPFS-0020
BPFS-0030
BPFS-0032
BPFS-0033
BPFS-0090
BPFS-0092
BPFS-0115
BPFS-0116
BPFS-0119
See table for application of meter stay extensions with our body kits:
Section, Final, Slip-On type, Stainless, Ninja 400
€73.77
Section, Final, Slip-On type, Stainless, Ninja 400
Final Section. Used with stock exhaust, and secured using the standard hose clamp. 43mm slip-on.
Compatible with the following silencers:
EXSL-0071
EXSL-0072
Part of Ninja 400 Slip-On sets
EXPS-0100
EXPS-0101
TYGA no: EXPT-0069
SKU: kaw-10090 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-Lower cowling Gp2010, Honda NSR250 MC21/MC28
€241.68
This product is almost identical to BPFL-9014, just wider lip to match the upper BPFU-9005.
Modelled on the RSW GP race bike design and adapted to fit the NSR250, this lower cowling represents the ultimate in fairing design for the NSR. Keeping the width to an absolute minimum, the design gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and improved design giving excellent finish both inside and out. Weight is now only approx. 1 kg but strength retained using a lip around the edge.
It is supplied with spacers to place between fairing and rear lower mounts to ensure clearance with exhaust chambers.
Compatible products:
This product must be used with BPFU-9005 but can also be used with BPFU-9012 and BPFU-9022.
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting. On some systems (particularly MC28) no spacing is necessary
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9114
SKU: hon-10237 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21, NSR250 MC28, Shop