Triple clamp set CNC black, Honda VFR400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR forks to fit VFR400R, NC30
CNC machined TYGA lower triple clamp for the NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your order that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1944
SKU: hon-10618 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Tyga Step Kit Replacement Link Rod, Female, 215 mm.
€13.99
Tyga Step Kit Replacement Link Rod, Female, 215 mm.
Uses M6x1 female thread in one end and M6x1 L/H female thread in the other. 215mm in length.
Silencer left shorty, carbon 70mm
€135.45
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0108L
SKU: yam-10090 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, Yamahafairing set street T10, NC30 kit
€707.45
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock NC30. It uses the original stock Honda mirrors but requires the special meter and mirror stays supplied.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0092
SKU: hon-10063 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Triple clamp set CNC black 88/89 , Honda NSR250
€673.59
Triple Clamp Set, CNC Black, NSR250, MC18, 1988/89
CNC machined TYGA triple clamp set for your NSR250 MC18 (1988/1889)
These stylish, all aluminium triple clamps are a direct replacement for the MC18 triple clamps, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1270
SKU: hon-10701 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC18, Stock list, all modelsGasket, Water Pump, MC28
€7.91
Gasket, Water Pump, MC28
TYGA no: 19226-KV3-680
SKU: hon-11091 Categories: ALL products, High performance, Honda, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Section, Final, Slip-On type, Stainless, Ninja 250R
€67.51
Final Section. Used with stock headers and EXPS-0034
Passenger seat cover yellow, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in Y-217 Queen Bee Yellow as shown in the photos. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
Note: this product is painted to match Y-217 Queen Bee Yellow. Note we also have a similar product BPFX-7128 YM, (Y-216 Marigold Yellow) which matches the colour of the MSX125 Grom sold in some markets. Be sure to confirm the colour of your bike before ordering.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 Y
SKU: MSX-10152 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, Shop