Seat set (grp) painted silver/black, CBR250 2011 –
€505.90
This bodywork set includes all the parts needed to convert the seat cowling for the 2011-13 CBR250R to TYGA GP style. Passenger seat cover, taillight, registration illuminating light and undertray and exhaust stay are all included as well as all fitting hardware. Supplied ready painted in silver and black to match the stock paintwork
TYGA no: BPFS-0107 Painted Silver/Blac
SKU: hon-10442 Categories: ALL products, Bodywork, Bodywork and carbon, CBR250R 2011 - 15, Honda, ShopAirbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Rear sprocket aluminium gold, VFR400 / RVF400
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0201-38T - TYSR-0201-42TÂ
SKU: hon-10349 - hon-10353 Categories: ALL products, By product, Honda, Sprockets, Sprockets, SprocketsCarbon cover center RR, Honda MSX125 2021-
€91.54
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7448
SKU: msx-10508 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopCarbon carburettor tray, Honda VFR400/RVF400
€180.64
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPCX-9309
SKU: hon-10360 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
€179.12
Frame Cover, Right, (Carbon) Honda NSR250 MC21/MC28
This lightweight carbon cover fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident.
TYGA no: BPCC-9312R
SKU: hon-10718 Categories: ALL products, Bodykit replacement parts, Bodykit replacement partsTop Triple clamp CNC silver , Suzuki RGV 250 VJ22 kit
€257.32
CNC machined top triple clamp with detachable ignition switch/lock holder for your RGV250 VJ22.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder is positioned to allow use of the steering lock, but can be removed for race use.
TYGA no: TYLY-0046
SKU: suz-10055 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiCarbon stay L lower cowl, Honda CBR250RR MC22
€39.27
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCC-7320
SKU: hon-11466 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, Silencers