TYGA bike dust cover lime green/black, (race) Kawasaki
€70.19
TYGA Bike Dust Cover, Lime Green/Black, NINJA
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0146
SKU: alg-10396 Categories: ALL products, Bike covers, ER6N-F 2009-11, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Shop, Various parts, ZX10R 2011 -15, ZXR250C, ZXR400LCarbon airduct set, Honda NSR250 MC28
€244.54
Power Jet #0, for NSR250 MC18/21/28. Replica part to replace HRC part: 99106-NKD-970
Use this jet to blank of the power jet circuit in NSR250 carbs.
TYGA no: BPCX-0031
SKU: hon-11374 Categories: ALL products, Bodywork and carbon, High performance, Honda, New OEM Honda parts, NSR250 MC28, Shop, Various partsTriple clamp set CNC black, Honda NSR250 MC18/MC21
€673.57
CNC machined TYGA triple clamp set for your NSR250 MC21.
These stylish, all aluminium triple clamps are a direct replacement for the MC21 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1241Â
SKU: hon-10265 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC18, NSR250 MC21, ShopBar End Weights, Pair, CBR125/150,
€19.69
Bar End Weights, Pair, CBR125/150,
Suitable for 2011 CBR 125 and 150 models. Replace the stock ones with these stylish replacements.
Warning; you will need an impact driver to remove the existing items on your bike.
TYGA no: 08F69-KPP-7A0 -
SKU: hon-10171 - hon-10173 Categories: ALL products, CBR125R/CBR150R 2011-, Honda, Universal partsBracket front brake CNC silver 84mm Brembo, Honda MSX125 GROM
€33.06
Bracket, Front Brake, 84 mm Brembo Conversion, Silver, MSX125 Grom
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1098)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
Photos show black version installed on bike
Only suitable for the non ABS models
TYGA no: TYLY-0098
SKU: MSX-10127 Categories: ALL products, By model, CNC parts, CNC parts, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, ShopExhaustset race Stainless steel carbon Silencer oval w cap, NC30 NC35
€1,251.76
The ultimate exhaust set for your VFR400 and RVF400,
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a oval carbon silencer EXSL-0035 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0028
SKU: hon-10302 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30VHM Cyl. Headset Honda CR500 ’89-’01
€608.95 €565.68
VHM Cyl. Headset Honda CR500 ’89-’01 (alg-10214) AA33121
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (51.00cc)Optional inserts:– blindThis VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33121Â Â Â Â Â Â Â Â
SKU: alg-10214 Categories: ALL products, Honda, Honda MX, Motocross, Shop, VHM productsCarbon front fender, Yamaha R1 2009-14
€228.53
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
TYGA no: BPCF-7102
SKU: yam-10003 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14