Carbon silencer guard (street) WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0048
SKU: ktm-10153 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSet exhaust chamber “mini” titanium.
€239.95
Set, Exhaust Chamber, Mini, Titanium
This miniature titanium chamber encapsulates the spirit of the two stroke enthusiast. Taper coned, these all titanium chambers are hand rolled and welded one by one by our expert welders, the very same method by the very same craftsmen who fabricate our full sized chambers for road and racing machines.
In fact each miniature chamber takes almost the same time to make an actual full sized one! This limited production piece is supplied with its very own real carbon fiber display stand to make it really stand out and look special.
Makes a great gift or talking point among visitors to your office or man cave!
* Not to be confused with a real motorcycle exhaust chamber, for decoration purposes only, though in theory it will work!
TYGA no: EXCS-0048
SKU: alg-10365 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopCarb insulator, Honda NSR250 MC28
€373.11
Carb insulator, Honda NSR250 MC28
TYGA no: 16210-KV3-950
SKU: hon-10895 Categories: ALL products, Honda, NSR250, NSR250 MC28, Various partsExhaust spring 2 stroke
€2.39
Replacement expansion chamber securing spring. Fits all TYGA two stroke systems.
This is a replacement part. When ordering chambers (EXCS-****), this item is included in the price and you do not need to order this parts separately.
TYGA no: EXSG-0001
SKU: alg-10010 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, Shop, YZ250 2005-15Lower Cowling (GRP), MC18, GP-T, Assy.
€183.50
Lower Cowling (GRP), MC18, GP-T, Assy.
This product is designed to be used with BPFU-9035 as part of the Bodywork set BPFS-xxxx
Designed in-house by TYGA Perforance and using 15 years experience of developing fairings for the NSR250, this fairing is lightest and most stylish yet. The design allows for the extra width of an HRC radiator while at the same gives maximum clearance with the track at high angles of lean. Other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is under 1 kg but strength retained using high strength epoxy resins and good design. See also carbon version BPCL-9035.
This product is supplied with lower mounting stays on the left and right.
Compatible products:
This product must be used with BPFU-9035
This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with chambers:
1. stock systems, fit with no spacing but will need a small part of the indent on the lower vent removed to clear the chamber. We can modify the lower to fit the stock chambers if requested
2. Tyga chambers require some spacing but no cutting.
3. Other systems, can not advise, but should require only spacing or possibly cutting of front of lower where front cylinder header exits.
TYGA no: BPFL-9035
SKU: hon-10728 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Top Triple Clamp, CNC Silver, NC35 RVF400
€196.92
Top Triple Clamp, CNC Silver, NC35 RVF400
CNC machined TYGA top triple clamp with detachable key holder for your RVF400 NC35
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
This product can be bought as a set TYLY-0042 with detachable ignition switch holder.
TYGA no: TYLY-0042(p)
SKU: hon-10784 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsTail, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
€58.89
Tail, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
TYGA no: 53065-5018-777
SKU: kaw-10169 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopFitting kit for Under cowl BPFL-7328 and BPCL-7328
€32.07
Fitting Kit for Under Cowl BPFL-7328 and BPCL-7328
Complete replacement fitting kit for TYGA-Performance Under Cowl (Belly exhaust type) for Honda MSX125/GROM
Suitable for BPFL-7328 (all colours) and BPCL-7328
Only sold as complete set.
TYGA no: TYBP-7328
SKU: msx-10463 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Various parts, Various parts