Carbon tank cover, Honda CBR125/CBR150 < 2006
€104.07
Stock shape. Replaces original cheap nasty plastic cover on first generation CBR125 (up to 2006) and all CBR150 models. This real carbon tank cover makes a huge improvement to the overall appearance and quality of the CBR.
Upper Cowling (Street GRP) MC28, Stock Shape, Painted Rothmans
€462.64
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFU-0007Painted
SKU: hon-10974 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersCarbon set, rear hugger and chain guard, KTM RC125/200/390
€235.46
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPFS-0226
SKU: ktm-10205 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet exhausts side by side stainless steel, Honda NSR250 MC28
€769.95
THE exhaust set for your Honda NSR250 MC28, cone welded for that HRC factory look!
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
For more information on how to get the best power out of this system, combine it with other parts of our MC28 Power Up Kit (see under ‘technical help’ to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit STAA-0002. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)
NEW! Our latest design, is provided with silencers clamping hardware which mounts directly to the stock MC28 silencer stays for a more secure and firm installation.
By selecting stainless steel for longevity and beauty, TYGA systems offer unbeatable value.
Please note this product fits MC28 only. For MC21, please select EXCS-0005A
This product, EXCS-0005B, has one chamber exiting left and one chamber exiting on the right.
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set
TYGA no: EXCS-0005b
SKU: hon-10306 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC28, ShopSilencer right shorty, carbon/kevlar 70mm
€135.45
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0107R
SKU: yam-10089 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaRC Valve Cable B, NSR150SP
€11.81
RC Valve Cable B, NSR150SP
TYGA no: 14340-KW6-840
SKU: hon-11171 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR150SPCarbon holder brake hose "NSR500V style), NSR250 MC28 – NC30 – NC35
€45.78
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPCC-0051
SKU: hon-11203 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC28, NSR500V NX6, RS250R NF5 / NX5, RVF400RR NC35, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30Silencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom
€313.65
Silencer, Stainless, Oval/Carbon End Cap, Underbelly Short, MSX125 Grom, no fittings
See also EXSL-0058 silencer, long type.