Mirror, Left Hand, Ninja 250R 2008 -12
€56.50
Mirror, Left Hand, Ninja 250R 2008 -12
TYGA no: 56001-0098
SKU: kaw-10234 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopKit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopAirbox side cover, Honda RS250 NX5
€278.67
Carbon airbox side cover.
Fits the TYGA air box, it’s not known if it will fit the HRC one.
TYGA no: sspecial010
SKU: special010 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsCarb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
€40.95
Carb Service Kit B, 21 pieces, Honda CB400 Super Four NC31
LiteTek Carburettor Seal Kit to suit
Honda CB400 Super Four NC31
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x OR-016 Fuel T-Pipe O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
6x OR-024 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x OR-014 Float Vent O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MY9-690)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-MY9-690)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Lower Cowling, GRP, RC36-2, RC30 Style, Street, Assy
€250.67
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFL-7049
SKU: hon-11485 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistCarbon Number board miniRacerXtreme, Honda MSX125 GROM
€65.29
Number Board, (Carbon) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to tranform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed.
Meterstay MiniRacerXtreme, Honda MSX125 GROM
€199.00
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Upper/meterstay race, Kawasaki Ninja 400 2018-
€233.78
Replacement Upper/Meter stay part of set TYLY-0216
TYGA no: TYLY-0214
SKU: kaw-10152 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-