Upper Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
€379.14
Upper Cowling, Race, Carbon Unpolished, KTM RC390 WSS300
Replacement Upper Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331 (GRP)
BPCU-7331 (Carbon Clearcoated)
Seat cowling stock shape painted RR, Honda RVF400 NC35
€419.72
Seat cowling stock shape painted RR, Honda RVF400 NC35
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge. If we receive no comment, we will send with taillight holes and mounts.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RR scheme (1994-95). This panel is finished to match the stock paintwork
TYGA no: BPFT-9004 (Painted RR)
SKU: hon-10515 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopUpper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Exhaust Chamber, Right, Side By Side Type, Yamaha RD350LC
€305.87
Exhaust Chamber, Right, Side By Side Type, Yamaha RD350LC
This is the bare right side replacement chamber for EXCS-0044
TYGA no: EXCB-0044R
SKU: yam-10065 Categories: ALL products, Exhausts, RD350LC 4L0, Stock list, all modelsCarb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsLower Triple clamp CNC silver, Suzuki RGV 250
€367.66
CNC machined TYGA lower triple clamp for your RGV250 VJ22.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
TYGA no: TYLY-0346
SKU: suz-10053 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiWater Hose, Fr. Head Out, MC28
€18.13
Water Hose, Fr. Head Out, MC28
TYGA no: 19508-KV3-830
SKU: hon-11162 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Upper Cowling, Carbon, NX5 RS250R (1995 NSR250 Style)
€855.35
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPCU-9336
SKU: hon-10976 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop