Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat set race GP-T, Honda NSR250 MC18

998.82

(1,208.57 inc. VAT )

Kit, Seat Set, GRP (Race), MC18 GP-T

This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC18.

‘Note this kit has been designed primarily for the 1989 model but will also fit the 1988. Note that for the 1988 model, the exhaust stays are suitable for our TYGA exhaust system but not the stock exhausts. The wiring harness differs on the 1988 model so there may be some modification of the wiring harness required.’

The kit comprises parts shown below which are also available separately.

Note there are 3 MC18 GP-T seat cowling kits to choose from:

BPFS-0160 Street GRP

BPFS-0161 Race GRP

BPFS-0162 Street Carbon

TYGA no: BPFS-0161

SKU: hon-10629 Categories: , , , , ,
Read more

HEL rear brake line Brembo 84mm, Honda MSX125 GROM

76.14

(92.13 inc. VAT )

Kit includes:

1x HEL Brake Line

4x Sealing Washer

1x M10x1.25 Banjo Bolt

1x M10x1.00 Banjo Bolt

20 degree side bend banjo goes to master cylinder. 20 degree side bend banjo goes to caliper.

See pictures for correct fitting.

Route the hose through the standard brake hose retaining clips

Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.

For ease of bleeding, the caliper should be removed and orientated so that the bleed nipple is at the highest point.

TYGA no: BLSR-0010 

SKU: MSX-10131 Categories: , , , , , ,
Read more

Exhaustset race Stainless steel motogp Silencer open, NC30 NC35

1,035.91

(1,253.45 inc. VAT )

The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.

Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.

For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.

If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.

NC35:

First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.

Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)

NC30:

On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.

For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.

This system may not comply to specific country noise emission regulations and is not homologated for street use.

TYGA no: EXPS-0011

SKU: hon-10101 Categories: , , , , , , , ,
Read more

Rubber Grommet type 3

0.61

(0.74 inc. VAT )

Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.

Read more

Carbon front fender, Honda CBR600 2007-16

211.00

(255.31 inc. VAT )

Carbon direct replacement for OEM Honda item. Pre drilled for easy fitting.

Please note TYGA logos are applied over the clearcoat and can easily be removed.

TYGA no: BPCF-7206

SKU: hon-10015 Categories: , , , ,
Read more

Top triple clamp CNC black , Honda RVF400 -> CBR600 fork

263.52

(318.86 inc. VAT )

Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion

CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.

Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.

TYGA no: TYLY-1059

SKU: hon-10553 Categories: , , ,
Read more

Set pipe Stainless full race system “round aluminium silencer”, Kawasaki ZXR400L

827.77

(1,001.60 inc. VAT )

Set, Pipe, Stainless, Full Race System, Round Aluminium Silencer, ZXR400L

This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. It uses a 450 mm long aluminium round silencer to keep sound to a minimum. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!

Compatibility:

This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.

The oil cooler system can be retained. No modifications required.

Please also see EXPS-0137, EXPS-0139 and EXPS-0140 for similar system.

TYGA no: EXPS-0138

SKU: kaw-10243 Categories: , ,
Read more

Tyga Step Kit Replacement Link Rod, 238mm

16.92

(20.47 inc. VAT )

Tyga Step Kit Replacement Link Rod, Male, 238 mm.

Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.

TYGA no: STAR-0010

SKU: alg-10279 Categories: , ,
Read more