Bearing, Clutch Pressure Plate, MC28
€20.63
Bearing, Clutch Pressure Plate, MC28
TYGA no: 91007-KM7-702
SKU: hon-11080 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Speedo Harness, MC28
€69.23
Speedo Harness, MC28
TYGA no: 37205-KV3-951
SKU: hon-11085 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC28Tank filler cap racing , Aprilia
€69.87
Tank Filler Cap, Keyless, Racing Type, Aprilia
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most Aprilia sportsbike models.
Suitable for the following models:
– Aprilia RS125, 6 holes (early model have 5 holes)
– RS250 All Years
– Aprilia RSV1000 Mile 1998 – 2003
– Aprilia Shiver 750 All Years
– Aprilia Tuono 1000 2003 – 2004
TYGA no: TYLY-0117
SKU: alg-10197 Categories: ALL products, Aprilia, RS125, RS250, Shop, Tank fillers, Various parts, Various partsTriple clamp set CNC black, Honda RVF400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1742
SKU: hon-10555 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopSteering stopper, KTM RC390
€19.17
Steering Stopper, KTM RC390
Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.
Fitting Instructions: BPSY-0159 Steering Stopper, KTM RC390
1) Remove 2x M3 bolts and spring washers, and remove the top plate
2) Remove cover from 3M double sided tape
3) Lift the steering stopper into position to wrap around the standard
steering stopper on the frame. It should hold itself in place with the tape
4) Refit cover, M3 screws and washers and tighten the screws securely.
5) Go racing!!
TYGA no: BPSY-0159
SKU: ktm-10052 Categories: ALL products, KTM, RC 390, Shop, Universal parts, Various partsCarbon key cover (pair), Yamaha V-max
€241.51
Weight approx. 0.110 kg. Includes both sides.
Replaces the stock cheap and fragile Yamaha ones
Carbon front fender, Kawasaki ZXR250 2008 –
€218.25
Great front fender for ZXR250, easy to instal and looks cool
Carbon direct replacement for OEM Kawasaki item.
Weighs a fraction of the original fender and sets your bike out from the crowd. Pre drilled for easy fitting.
TYGA no: BPCF-7016
SKU: kaw-10014 Categories: ALL products, Carbon, Kawasaki, Ninja 250R 2008- 12, ShopSubframe aluminium , Honda VFR400 NC30
€453.76 €408.41
This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.
TYGA no: TYLY-0224
SKU: hon-10984 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30