Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Tube, Carbon, Round, 83mm x 350mm

106.11

(128.39 inc. VAT )

made from high TG resin and 2/2 weave twill carbon cloth, this replacement tube is suitable for the following TYGA Performance exhaust silencers. It is also suitable for other manufacturers’ silencers of the same dimensions. See below for exact specifications

TYGA no: EXTC-0003

SKU: alg-10298 Categories: , ,
Read more

Pillion seat cover “carbon”, KTM RC390 2022 –

177.68

(214.99 inc. VAT )

Set pipe Full race system WSS300 (race), KTM RC390

This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.

And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.

By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.

The system features a primary silencer, which helps reduce the sound level without any loss of performance.

The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.

Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.

As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.

Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112

TYGA no: BPCX-7731

SKU: ktm-10209 Categories: , , , , ,
Read more

Endurance painted Kit complete bodywork stock RR, “single” Honda RVF400 NC35

1,878.73

(2,273.26 inc. VAT )

Seat Cowling, (GRP), NC30/NC35 GP-T

This product is the latest TYGA design for the 400 V4 and is designed to be stylish and lightweight. This product includes ONLY the seat cowling for replacement in the event of an accident or can be used for a project bike of another model. For the MC21, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification. For installation of any other model the customer will need to make the necessary modifications,

BPFS-0148 (GRP, NC30)

BPFS-0149 (GRP, NC35)

BPFS-0150 (Carbon, NC30)

BPFS-0151 (Carbon, NC35)

The advantages of this seat cowling over stock include:

– use with rest of seat cowling kit, much lighter than stock

– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9133).

– higher at the rear, to give the bike a more agressive stance

– better rider control by use of enclosed seat area

– improved strength with precision in design and fitment

Tyga Performance Compatible Parts for this Product:

This product is compatible with:

BPFX-9034 and BPCX-9134 Undertray, NC30/NC35 GP-T

TYLY-0133 Subframe, NC30/NC35 GP-T

TYLY-0130 Batterybox NC30/35 GP-T

BPFX-9234 Seat Support, NC30/NC35 GP-T

BPSP-0006 Seat Pad, GP-T

BPAC-0001 Rear Brake Reservoir Kit,

BPLT-0009 LED Taillight

BPFX-9133 Registration Plate Holder GP-T

TYGA no: BPFS-0213

SKU: hon-11395 Categories: , , ,
Read more

Carbon front fender, monster style gloss, Honda MSX125 Grom 1st/2nd/3rd gen.

192.39

(232.79 inc. VAT )

Front Fender, (Carbon) Monster Style, MSX125 Grom. This Monster front fender looks much neater than the slab styled Honda part. Made in lightweight carbon fiber, it actually weighs half the stock plastic one and saves a whopping 200g! This fender is supplied in a gloss finish. We also do a satin version, BPCF-7128f

Read more

RC Valve Shaft E Clip, MC28

1.51

(1.83 inc. VAT )

RC Valve Shaft E Clip, MC28

TYGA no: 90601-KV3-000

SKU: hon-11123 Categories: , , , , ,
Read more

Stay maggot silencer, Honda MSX125SF GROM

21.25

(25.71 inc. VAT )

Stay, Maggot Silencer, MSX125SF, High Level Exhaust

This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhaust:

EXPS-0065 Set, Pipe, Full Race system, MSX125SF Grom, Moto Maggot

Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0177 which has the mounting holes further toward the rear and is used with our oval silencer full race system EXPS-0066 and EXPS-0067.

TYGA no: BPSY-0175

SKU: MSX-10342 Categories: , , , ,
Read more

Carbon fork guard left, Honda Monkey 125 2018-

84.32

(102.03 inc. VAT )

Carbon fork guard left, Honda Monkey 125 2018-

Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCC-7042L

SKU: msx-10433 Categories: , , , ,
Read more

TAF 5 speed cross mission Takegawa for Honda MSX / Grom

435.66

(527.15 inc. VAT )

TAF 5 speed cross mission Takegawa for Honda MSX / Grom

High performance with high quality and durability.

TAF 5 speed cross mission Takegawa for Honda MSX / Grom 125_.

Gear ratio

– Normal mission

1st : 2.500

2nd : 1.550

3rd : 1.150

4th : 0.923

– 5-speed Cross mission

1st : 2.333

2nd : 1.684

3rd : 1.272

4th : 1.040

5th : 0.923____

Read more