Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Rear sprocket aluminium gold, NSR250 MC28 CBR250/300

67.41

(81.57 inc. VAT )

Upgrade your bike with TYGA Sprockets.

Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.

TYGA no: TYSR-0101-37T  - TYSR-0101-44T 

SKU: hon-10422 - hon-10429 Categories: , , , , , , , , ,
Read more

Silencer carbon round, m carbon cap (4 stroke) 2

394.60

(477.47 inc. VAT )

This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.

Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.

Read more

Brake Link Pin

4.60

(5.57 inc. VAT )

Brake Link Pin

This is a Honda OE part

TYGA no: 95015-54000

SKU: hon-10790 Categories: , ,
Read more

Carbon frame/fairing (pair), NC30

176.58

(213.66 inc. VAT )

Carbon frame in-fill panels for NC30. Replace the nasty plastic original ones with thes elegant carbon ones.

TYGA no: BPCC-7417

SKU: hon-10160 Categories: , , , , , ,
Read more

Pod filter (pair), Suzuki RGV250 VJ21/VJ22

95.73

(115.83 inc. VAT )

Pod Filter, Pair, RGV250 VJ21/VJ22

High air flow pod filters, specifically designed for the RGV250 VJ21/22.

In house designed and 3D printed flexible manifolds are swept at 10° for frame and fuel tank clearance, and also feature locking tabs to ensure a snug and secure fit onto the RGV carburetor bellmouth.

Uses high quality Japanese air filter foam for maximum airflow, while providing protection from dust and debris entering the engine.

Please use the standard manifold clamps to secure to the carb.

**As with any performance upgrade, please ensure that you check and reset the carb settings accordingly to avoid engine damage.**

Read more

Front Fork Preload Adjusters black/gold (Pair), Honda MSX125 GROM

172.49

(208.71 inc. VAT )

Front Fork Preload Adjusters, Pair, MSX125 Grom, Black/Red

These fully functional preload adjusters replace the blank end caps on the stock MSX125 Grom front suspension. It is generally acknowledged that the MSX125 is a bit soft on the front and these caps allow the rider to increase (or reduce) the amount of preload on the internal springs, which in turn, effectively increases or reduces the stiffness of the front forks allowing for a better set up for your riding style or conditions.

These adjusters allow you and extra 6mm of preload from standard.

Supplied in black and gold anodised finish, (see TYLY-0097 and TYLY-1097 for other colour versions too) these adjusters are as beautiful as they are functional.

TYGA no: TYLY-1097

SKU: MSX-10136 Categories: , , ,
Read more

Triple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks

714.33

(864.34 inc. VAT )

Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks

CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.

This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

There is no provision for the ignition switch, so an alternative mounting location must be found.

Pitch of forks: 200mm (Same as RS250)

Fork Offset: 35mm (Same as NSR250)

Top Clamp: 50mm Bore

Bottom Clamp: 54mm Bore

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-0262

SKU: hon-10914 Categories: , , , , , , ,
Read more

Carbon chain guard, Yamaha R1 2004-8

137.88

(166.83 inc. VAT )

Same shape as stock. To be used with our R1 carbon hugger BPCH-7002.

TYGA no: BPCX-7002

SKU: yam-10006 Categories: , , , ,
Read more