Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Bearing, Waterpump, MC21/28

9.86

(11.93 inc. VAT )

Bearing, Waterpump, MC21/28

Read more

Triple clamp set CNC black, Honda RVF400 -> CBR600 fork

673.59

(815.04 inc. VAT )

Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35

CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1742

SKU: hon-10555 Categories: , , , , ,
Read more

Silencer aluminium round 380mm (4 stroke) 2

206.30

(249.62 inc. VAT )

Silencer, Aluminium, Round, 2 x 380 mm., Assy.

This silencer has polished stainless steel endcaps and a tough anodized aluminium tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.

The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.

Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.

Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.

Read more

Upper cowling set GRP endurance , Honda VFR400 NC30

434.45

(525.68 inc. VAT )

Upper Cowling Set, Endurance, (GRP) NC30

This Suzuka 8 Hour inspired cowling is supplied with four headlight covers, two unpainted ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC30 headlight and mounts to the bike using the mounting hardware provided (Upper stay and front mounting bolt and spacer bush. All the other parts mount the same way as stock including meter stay, mirrors, indicators etc. We recommend that this be used with the TYGA lower cowling BPFL-0003, or it can be used with stock Honda NC30 lower and inner cowling too.

The windscreen is not included. Please order one of the following windscreens:

SCRE-0041
SCRE-0042
SCRE-0043
SCRE-0105
SCRE-0125
SCRE-0132

TYGA no: BPFS-0152

SKU: hon-10639 Categories: , , , , ,
Read more

Undertray MiniRacerXtreme, Honda MSX125 GROM

65.30

(79.01 inc. VAT )

Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>

TYGA no: BPFX-9132

SKU: MSX-10272 Categories: , , , ,
Read more

Carbon tank protectors MK1, Aprilia RS250

90.01

(108.91 inc. VAT )

Carbon tank protectors MK1, Aprilia RS250 (apr-10082)

Perfect for race but also road use, gives your bike that Gp look!

Product is of full carbon

TYGA no: 004400KT/P

SKU: apr-10082 Categories: , , , , ,
Read more

TYGA bike dust cover Blue/Black RGV

63.10

(76.35 inc. VAT )

TYGA bike dust cover Blue/Black RGV

This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.

Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.

Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities apply.

Read more

Bracket rear brake CNC silver 84mm Brembo, Suzuki RGV250 VJ23

110.40

(133.58 inc. VAT )

Bracket, Rear Brake, 84mm Brembo Conversion, Silver, VJ22 and VJ23.

This is to fit the 84mm pitch rear caliper.

Also available in black (TYLY-1090)

Applicable with the following Brembo model calipers:

Rear caliper P2

Code 20.6951.46

and

Rear CNC caliper P2

Code XA7.29B0

TYGA no: TYLY-0312

SKU: suz-10230 Categories: , , , ,
Read more