Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Fairingstay T10, NC35

85.34

(103.26 inc. VAT )

Upper /Mirror Stay for T10 TYGA fairing kit for NC35. Similar to stock item but positions mirrors correctly for fitment with our T10 TYGA fairing kit.

TYGA no: TYLY-0060

SKU: hon-10156 Categories: , , , , , ,
Read more

NGK sparkplug R7282-10, short

58.94

(71.32 inc. VAT )

NGK sparkplug R7282-10, “short” (alg-10227)

The short version of the R7376 plugs if clearance is a problem. NOTE: NGK TRS1225 cap required.

Extreme Long Life Laser Iridium Plug, 14mm Thread, 19mm (3/4″) Reach, 13/16″ (20.6mm) Hex Size, Gasket Seat, Resistor, Solid Terminal, Iridium Tipped Fine Wire Center Electrode and Platinum Tipped Ground Electrode, .020″ (0.508mm) Gap.

NGK’s Standard Plugs are Constructed for Longer Life and Optimum Performance.

Read more

Fork seal 41mm, Honda

30.75

(37.21 inc. VAT )

Fork Seal Kit, for Honda 41 mm. forks

Read more

Rear sprocket aluminium gold, Suzuki RGV250

67.41

(81.57 inc. VAT )

Upgrade your bike with TYGA Sprockets.

Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.

TYGA no: TYSR-0105-40T - TYSR-0105-48T

SKU: suz-10071 - suz-10081 Categories: , , , , , , , , ,
Read more

Decal, Fuel Tank, Kawasaki, Black, Ninja 250R 2008 -12

3.00

(3.63 inc. VAT )

Decal, Fuel Tank, Kawasaki, Black, Ninja 250R 2008 -12

TYGA no: 56054-0057

SKU: kaw-10229 Categories: , , , ,
Read more

Set exhaust, race system double maggot , KTM RC390 2014 – ’21

866.32

(1,048.25 inc. VAT )

.Set, Pipe, Race System, RC390, Stainless Moto MaggotUpdate your bike with this great TYGA performance, KTM power part!!.Set, Pipe, Race System, RC390, Stainless Moto MaggotModel 2017This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual underseat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected. Other systems which have the exhaust exiting the right side of the swing arm will usually suffer terminal damage. This system increases performance, saves weight and enhances the looks of the bike. The system is not supplied with decibel killers, and may not meet noise regulations in your area.CompatiblityThis exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.Please also see EXPS-0091 for similar system with oval silencersPlease refer to dynographA) All Standard.B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition mapC) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition mapVery useful gains especially in the mid range for both B) and C), for much stronger acceleration.The silencer was full bore.NEW! for the 2017 model we added the EXPT-0003:Header exhaust, designed for unimpeded flow. Unlike the stock KTM header for the RC390, which has creases and dents to fit between the frame and engine, the TYGA header has been carefully fabricated to retain the round cross sectional area throughout, to avoid turbulent gas flow. Complete with Lambda sensor bung in the original position.Compatible with the following exhausts:Compatible with 2014-2016 KTM stock exhaust and other systems using the stock KTM header for those years.Compatible with 2014-2016 TYGA exhaust systems EXPS-0061 and EXPS-0062Included with 2017 on TYGA exhaust systems EXPS-0091 and EXPS-0092<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>

TYGA no: EXPS-0092

SKU: ktm-10092 Categories: , , , , , ,
Read more

Carbon fork guard left, Honda Monkey 125 2018-

84.32

(102.03 inc. VAT )

Carbon fork guard left, Honda Monkey 125 2018-

Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCC-7042L

SKU: msx-10433 Categories: , , , ,
Read more

Carbon rear hugger, Suzuki GSX 1000 K9-K11

171.31

(207.29 inc. VAT )

Lightweight carbon fibre direct replacement for Suzuki OEM item. Predrilled for use with stock mounting hardware.

Let your bike stand out from the crowd with this beautiful carbon fibre product.

TYGA no: BPCH-7403

SKU: suz-10048 Categories: , , , ,
Read more