Tail light LED RC211V
€59.92
This tail light is wired to fit the stock NC30/35 wiring harness for tail light and brake light functions. It also has bullet connectors for connecting to the registration/license plate holder light. It is very light and is held in place by two sided adhesive tape. To be used on our RC211V and T13 style seat cowlings but could be adapted to fit any other model which has a near vertical surface to apply it to.
TYGA no: BPLT-0013
SKU: alg-10068 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set, Pipe, Full Race System, High Level, MSX125 2021-, Stainless Oval/Carbon End Cap
€567.59
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
CDI Zeeltronic VJ23 + PC Programming Cable
€453.72
Hi-Flo Snorkel, Air Box, RGV250 VJ23
This Hi-Flo Snorkel is dyno developed in-house by TYGA Performance to eliminate the restriction of the standard VJ23 air box snorkel.
The RGV250 VJ23 has it’s true potential restricted in three main areas; Exhausts, CDI and of course the standard air box snorkel.
While just replacing the snorkel will obviously have a small benefit, it is best used in conjunction with our other VJ23 power up parts.
Available in Black/Red and All Black please choose your preferred colour in the options below.
Please see TPER-0082 for all the parts you need to build the ultimate VJ23 street weapon!
This is a 3D printed product using tough and durable materials. Some surface imperfections may be visible, but this in no way affects the fit or performance of the product.
We have 2 color option, Red/black and all black.
please specify in comment box at checkout what color you want.
Manifold, Left, Ninja 250
€29.48
This is a replacement part. When ordering an exhaust system, this item is included in the price and you do not need to order this parts separately. Note the left and the right are different. See picture below.
Compatible with the following TYGA systems:
EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017, EXPS-0018 and EXPS-0032
TYGA no: EXMN-0009L
SKU: kaw-10106 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopTop End Rebuild Kit MC18, Cyl. B, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘B’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002B
SKU: hon-10837 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Carbon tankshields, Honda CBR600 2007-12
€293.21
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda. They are complete with all the fitting tabs and fastener positions for a perfect fit.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
Frame In-fill panels (pair) GRP, RC36-2 RC30 style
€177.69
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPFC-7049
SKU: hon-11461 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, StocklistStay, wire harness connector, Honda RS250R NXA
€4.64
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0322
SKU: hon-11384 Categories: ALL products, Honda, RS250R NF5 / NX5, RS250R NXA, Various parts