Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Carbon sprocket cover, Honda Monkey 125 2018 –

124.31

(150.42 inc. VAT )

Carbon sprocket cover, Honda Monkey 125 2018 –

Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCX-7442

SKU: msx-10430 Categories: , , , ,
Read more

Steering stopper, KTM RC390

19.17

(23.20 inc. VAT )

Steering Stopper, KTM RC390

Designed and manufactured in house by TYGA Performance, this stainless steel steering stopper restricts the amount of steering angle on the KTM RC series. Ideal for racing and preventing smashed thumbs from ‘tank slappers’. Installs in minutes. No special tools or dismantling of the bike required.

Fitting Instructions: BPSY-0159 Steering Stopper, KTM RC390

1) Remove 2x M3 bolts and spring washers, and remove the top plate

2) Remove cover from 3M double sided tape

3) Lift the steering stopper into position to wrap around the standard

steering stopper on the frame. It should hold itself in place with the tape

4) Refit cover, M3 screws and washers and tighten the screws securely.

5) Go racing!!

TYGA no: BPSY-0159

SKU: ktm-10052 Categories: , , , , ,
Read more

Clutch Outer, MC28 SP

369.69

(447.32 inc. VAT )

Clutch Outer, MC28 SP

TYGA no: 22101-KV3-980

SKU: hon-11159 Categories: , , , , ,
Read more

Silencer clamp double GP 70mm (double bolt)

34.12

(41.29 inc. VAT )

Clamp, Silencer, GP, 70mm (2x Bolt)

Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.

This product, EXCL-0004, has a tab welded above the top silencer to secure the clamp and silencers to an exhaust stay or they are secured to the bike by use of a central position such as on the VJ22 and the Aprilia RS-250 with an otherwise completely stock bike.

If you don’t need the tab to secure to the subframe, please refer to EXCL-0005 which does not have a tab on the top and just clamps the silencers to each other.

Compatible with the following TYGA systems, when used with our 70mm silencers, EXSL-0083 and EXSL-0084:

EXCS-0006A
EXCS-0006B
EXCS-0008
EXCS-0010

Read more

Rear sprocket aluminium gold, Honda CBR500

67.41

(81.57 inc. VAT )

Upgrade your bike with TYGA Sprockets.

Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.

TYGA no: TYSR-0111-40T - TYSR-0111-43T 

SKU: hon-10331 - hon-10334 Categories: , , , ,
Read more

Carbon fuel tank, Honda NSR250 MC28

1,444.49

(1,747.83 inc. VAT )

Fuel Tank, Carbon, NSR250, MC28

Top quality reproduction of the steel MC28 fuel tank in carbon fiber. This product is a direct replacement for the stock fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).

Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).

Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.

Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.

This product can be used on all MC28 model NSR250s and MC21 models if fitted with an MC28 compatible seat cowling. This means that if you have an MC21 and would like to install this tank, it is possible by installation with any of the following TYGA seat cowling sets:

BPFS-0003

BPFS-0004

BPFS-0032

BPFS-0059

BPFS-0060

BPFS-0129

BPFS-0130

BPFS-0131

TYGA no: BPCG-0001

SKU: hon-10682 Categories: , , , , , , ,
Read more

Carbon sprocket cover, Aprilia RS250

115.38

(139.61 inc. VAT )

Sprocket Cover (Carbon), Aprilia RS-250

Attractive alternative to the stock sprocket cover and uses original mounting bolts.

TYGA no: BPCC-7217

SKU: apr-10075 Categories: , , , , ,
Read more

Set full race system with stainless silencer with carbon cap, Honda MSX125 GROM

480.85

(581.83 inc. VAT )

Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap, First Generation

This full race system has been specifically designed for the MSX125 to maximise performance and looks.The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.

Total weight of the set is 2300 grams

Performance and Dynograph

The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).

A useful gain all through the range, increasing as the revs rise up to maximum.

The silencer was full bore. No decibel killer used.

Similar Products:

Please also see:

EXPS-0042 Moto Maggot System

EXPS-0041 Carbon Oval Silencer System

EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

TYGA no: EXPS-0052 

SKU: MSX-10277 Categories: , , , ,
Read more