Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Seat set T9, CBR400RR

207.80

(251.44 inc. VAT )

This product consists of the seat cowling only. For a complete kit including undertray/rear fender tail light etc. select BPFS-0074

TYGA no: BPFT-9027

SKU: hon-10044 Categories: , , , ,
Read more

Throttle housing HRC NSR250, NX5 / NXA

206.99

(250.46 inc. VAT )

Throttle Housing. NSR250, HRC, Assy

This throttle is a reproduction of a factory HRC one used on the factory NSR250s in the 1990s and similar. For one of our projects, a customer kindly sent us the scan of the HRC part and from that we were able to reproduce this almost impossible to find part. The actual housing is CNC machined in 6061 T6 aluminium. The machining marks are then removed by bead blasting and then the part sprayed black to faithfully reproduce the look of the original factory cast one. The actual throttle is 3D printed in tough Nylon. The throttle uses an M6 type cable adjuster screw to secure to the cable and about 45 degrees of rotation of the throttle, for 32mm movement on the throttle cable.

Note, this is not plug and play for any motorcycle that is available from Honda or even HRC for that matter. It was designed for unobtainable factory NSR250 motorcycles and the like and will NOT fit your MC21, MC28 etc. However, it is an interesting and useful product for anyone wanting a special looking throttle and willing to adapt it to their project. We wanted this for our NX5 factory racer project which is still in development and we plan to hook it up to Keihin SPJ carburetors. If anyone else wants to do a similar project then hopefully, this will useful to them.

TYGA no: TPER-0077

SKU: hon-11223 Categories: , , , , ,
Read more

Triple clamp set CNC black, NC35

673.57

(815.02 inc. VAT )

riple Clamp Set, CNC Black, NC35 RVF400

These stylish, all aluminium triple clamps are a direct replacement for the notoriously easy to bend, OEM NC35 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

TYGA no: TYLY-1242

SKU: hon-10157 Categories: , , , , ,
Read more

Exhaust Stay, MC18, GP-T, Right, Assy.

68.35

(82.70 inc. VAT )

Exhaust Stay, MC18, GP-T, Right, Assy.

This replacement exhaust stay is designed to be used with our GP-T kit for the MC18 and attaches to subframe TYLY-0183. Note this kit uses two stays, one for each side:

1 x TYLY-0198L for left

1 x TYLY-0198R for right

NSR250 1988 and 1989 MC18

TYGA no: TYLY-0198R

SKU: hon-10735 Categories: , , , ,
Read more

Triple clamp set CNC black, Suzuki SV650

573.36

(693.77 inc. VAT )

CNC machined TYGA triple clamp set for your RGV250 VJ22.

These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!

They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.

Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.

Top clamp pinch bolts: 23Nm.

Update your RGV250 with these light, strong and cool triple clamp set.

TYGA no: TYLY-1581

SKU: suz-10190 Categories: , , , ,
Read more

Clutch Damper Rubber, MC28SP

9.82

(11.88 inc. VAT )

Clutch Damper Rubber, MC28SP

TYGA no: 22203-KV3-780

SKU: hon-11154 Categories: , , , , ,
Read more

Carbon shroud (pair), Honda MSX125 2021-

451.95

(546.86 inc. VAT )

Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-

Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.

See also BPFF-7142 for GRP version.

*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.

TYGA no: BPCX-7248

SKU: msx-10501 Categories: , , , ,
Read more

Silencer stainless steel Motogp style (4 stroke) 43mm maggot

194.80

(235.71 inc. VAT )

Maggot silencer with 43 mm. inside diameter. Same dimensions as Ninja 250/300 model but without mounting lug. Includes silencer clamp, mounting springs and spring hooks to weld on existing exhaust system tail pipe.

Tyga Moto Maggots are now available in five sizes, Mini, Midi, Moto, and Monster Mega Monster with inlet sizes of 35 mm., 43 mm., 50.8 mm., 54 mm and 64mm. respectively. As well as the basic five sizes, we have listed here some of the model specific Maggots which have lugs welded to them to suit their specific application.Of course, these can be mounted to other exhausts and offer an alternative to the basic Maggots.

All the silencers shown here are supplied with springs, spring hooks, and where applicable, mounting clamps.

 

<a title= Maggot 43mm href= {{media url= wysiwyg/02-maggot-exsl-4013-43mm-eaf5c71d.PDF }} target= _self >Click here for PDF</a>

 

 

 

TYGA no: EXSL-5013

SKU: alg-10114 Categories: , , ,
Read more