Carbon front fender, Yamaha YZF-R125 2009-
€228.22
Front Fender (Carbon), Yamaha YZF-R125 2009-2013. Supplied with all mounting hardware made from high quality stainless steel as shown in the photo below
Carbon hugger short, Ducati 848/1098/1198
€122.25
This carbon rear hugger protects the rear shock and underside of your pride and joy from road dirt as well as making your bike stand out from the crowd. Very easy to install. Weight approx. 0.10 kg.
Note; we also make a longer hugger (BPCH-7123) for this model shown in photo for comparison
Airbox "GRP", Honda NSR250 MC21/MC28
€423.04
Airbox, GRP, NSR250 MC21/MC28
This high quality GRP air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and GRP for light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank
See also BPCX-0007 for the same airbox in carbon/kevlar
*please do note some product photos are for reference and show the Carbon/Kevlar version fitted on our NSR250 project bike
TYGA no: BPFX-0007
SKU: hon-11070 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Throttle Cover, Set, Carbon, NSR250 MC18/21/28
€70.19
Throttle Cover, Set, Carbon, NSR250 MC18/21/28
Carbon throttle cover set see also: BPCX-0009(lower) and BPCX-0009(upper)
Fits:
Honda NSR250 MC18
Honda NSR250 MC21
Honda NSR250 MC28
TYGA no: BPCX-0009
SKU: hon-11205 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsUndertray, Race, (GRP), MC18, GP-T
€42.91
Undertray, Race, (GRP), MC18, GP-T
This product is to be used with BPFT-9035 and BPCT-9035 seat cowlings
(Also can be used with BPFX-9133 Registration Plate Holder GP-T)
TYGA no: BPFX-9335
SKU: hon-10732 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, NSR250 MC18Seat set street Tyga doubleseat, NC30 kit
€748.25
Seat set street Tyga doubleseat, NC30 kit
Practicality
This seat cowling kit retains the stock NC30 sub frame and passenger seat so it is possible to carry a passenger as well as keep the luggage compartment. The kit re-uses the original Honda seat pads, locks and latch mechanism.
This kit is designed to give the NC30 a modern appearance while at the same time being a practical every day bike. The kit is supplied with all the mounting hardware and lighting and is straight forward to install with a stock machine as a starting point. Rear light LED.
The seat cowling keeps the tank in the stock position and the fuel cock is accessible.
Compatibility
This kit can be used with either stock Honda fairings or TYGA ones. If used with hon-10065 (as shown in the photos), some repositioning of the side stays is required because hon-10065 is designed for a slightly raised rear position on the fuel tank. For all other TYGA fairings, no modifications are required and the seat cowling kit can be installed without affecting the fairing.
This product is designed for the NC30. To use it with the NC35 is possible but it will require NC30 seats and some modification of the electrical component positions as well as stays for the front sub frame and tank mounting positions.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0078
SKU: hon-10067 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Passenger seat cover Black, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in asteroid black as shown in the main photo. Note some other photos show different colours so please be careful when making your selection.
Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 B
SKU: MSX-10146 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopSilencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
€292.66
Silencer, Stainless, Oval, Carbon End Cap, Ninja 400, Assy
Silencer with 43 mm. inside diameter. Please note this is a replacement for the 2018- Ninja 250/300 slip on system ( EXPS-0101)
TYGA no: EXSL-0072
SKU: kaw-10092 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Kawasaki, Ninja 400R 2018-