Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Top Triple Clamp Nut (M24 x1), Honda MSX125 GROM

25.7525.76

(31.16 inc. VAT )

Top clamp nut in colour. Light weight and good looking. Anodised for a long lasting finish. available in a variety of other colours. See photos.

This nut is a direct replacement to the top nut on many Honda machines, such as MSX125, MC18~28, RVF400, NSR150SP, CBR250/400/500, CBR900. (not suitable for NC30, RC30, SP2 but fits SP1)

The thread is M24x1

Torque setting: 65Nm

TYGA no:  H136-A8Z1-0193GOLD-

SKU: msx-10203- Categories: , , , , , ,
Read more

Carbon rear hugger, Kawazaki Z125

230.58

(279.00 inc. VAT )

TYGA no: BPCH-7038 

SKU: kaw-10058 Categories: , , , ,
Read more

Upper cowling set GRP endurance , Honda RVF400 NC35

327.07

(395.75 inc. VAT )

This endurance upper cowling is a direct replacement for the stock Honda upper cowling and side inspection covers. This Suzuka 8 Hour inspired fairing is supplied with four headlight covers, two blanking ones and two in clear (yellow can be supplied instead of clear, see available options on the bottom of the page) The fairing uses the stock NC35 headlight and mounts to the bike in the same way as the Honda part including mirror stay, meter stay, mirrors, air duct, indicators etc. It can be used either with the TYGA lower cowling BPFL-0103, or can be used with stock Honda NC35 lower and inner cowling too. We also supply this product painted in RR and RT colours ready to install. See our product list for the painted versions.

The windscreen is not included. Please order one of the following windscreens:

SCRE-0041

SCRE-0042

SCRE-0043

SCRE-0105

SCRE-0125

SCRE-0132

Note: some photos show the painted RR set ( BPFS-0153)

TYGA no: BPFS-0153

SKU: hon-10640 Categories: , , , , ,
Read more

Seat set race GP-T, Honda VFR400 NC35

927.76

(1,122.59 inc. VAT )

The ultimate seat set for your V4 Honda!

This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.

The kit is supplied with all mounting hardware including subframe and battery box.

Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.

** We recommend trial fitting and making and minor adjustments before painting

TYGA no: BPFS-0166

SKU: hon-10633 Categories: , , , , ,
Read more

Carbon front fender Dax German

230.75

(279.21 inc. VAT )

Front Fender, (Carbon) German type, Honda Dax. Carbon direct replacement for original part. Lighter and looks way, way cooler!

TYGA no: BPCF-7037

SKU: MKY-007 Categories: , , , , , ,
Read more

Undertray street GRP GP-T, Honda NSR250 MC21/MC28

75.27

(91.08 inc. VAT )

Undertray, Street, (GRP), NSR250 GP-T

This product is to be used with BPFT-9033, BPFT-9133, BPCT-9033 and BPCT-9133 seat cowlings

Also to be used with BPFX-9133 Registration Plate Holder GP-T.

Note the following products are all compatible with the above seat cowlings and are interchangable between the MC21 and MC28

BPFX-9033 Undertray Street GRP

BPCX-9033 Undertray Street Carbon

BPFX-9333 Undertray Race GRP

BPCX-9333 Undertray Race Carbon

Read more

Silencer mesh/slash cut, slip on with carbon cover, Yamaha R25/R3

209.75

(253.80 inc. VAT )

Set, Pipe, Slip On, Mesh, Slash Cut, Yamaha R25/R3

Hand welded from stainless steel, this is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhaust cover and fit the TYGA silencer and exhaust cover.

This silencer looks great, significantly reduces weight without being too loud due the cat box reducing noise significantly before it reaches the tail pipe. Nevertheless, this product may not comply with noise regulations for some states and territories).

Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.

TYGA no: EXPS-0071

SKU: yam-10058 Categories: , , , ,
Read more

Side fairing right RC211V, CBR400RR

167.21

(202.32 inc. VAT )

This is a replacement part for bodywork set BPFS-0019

TYGA no: BPFU-9023R

SKU: hon-10062 Categories: , , , ,
Read more