Oops this is 404! Let's help you find what you were looking for...

Tyga Europe Performance Parts provides a wide range of motorparts for your bike! 

Kit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC21, Painted Rothmans

2,968.09

(3,591.39 inc. VAT )

Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22

CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.

Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.

They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.

Tightening recommendations:

Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.

TYGA no: BPFS-0206

SKU: hon-11279 Categories: , , , , , , ,
Read more

Lower Cowling (Carbon), NC30, GP-T, Assy.

473.74

(573.23 inc. VAT )

Lower Cowling (Carbon), NC30, GP-T, Assy.

This product is designed to be used with BPCU-9034 as part of the Bodywork set BPFS-0146

.

Designed in-house by TYGA Performance and using 15 years experience of developing fairings for the NC30, this fairing is lightest and most stylish yet. The design incorporates mounting points for the radiator mesh and other features include a vent underneath and high quality lamination by our skilled craftsmen. Weight is about 1 kg but strength retained using high strength epoxy resins and good design. See also GRP version BPFL-9034.

Compatible products:

This product must be used with BPCU-9034

This lower cowling is designed to be used with stock or race exhaust systems though some spacing may be necessary to get clearance with race exhausts:

1. stock systems, fit with no spacing but care should be taken when installing to avoid any touching or proximity to exhaust and subsequent burning of the fairing.

2. Tyga exhaust can be installed with no modification

3. Other systems, we can not advise, but should require only spacing or possibly cutting area around where pipe exits near sidestand.

TYGA no: BPCL-9034

SKU: hon-10763 Categories: ,
Read more

** USED ** wire harness Suzuki RGV250 VJ22 GERMAN type

116.60

(141.09 inc. VAT )

** USED ** wire harness Suzuki RGV250 VJ22

GERMAN type, different solenoid system.

*** no returns on used parts ***

Read more

Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.

1,859.00

(2,249.39 inc. VAT )

Forged Aluminium Racing wheel set, 5 spoke, PVM, Front 3.50 x 17, Rear 5.5 x 17, Gold.

This racing wheel set has been designed specifically for the following model applications:

NX5 RS250R

RC30 VFR750R

RC45 RVF750

This exciting 5 spoke forged racing wheels set, has been exclusively developed by TYGA Performance and PVM to bring you the ultimate wheel combination for your motorcycle. PVM is a long established German wheel manufacturer, supplying motorcycle manufacturers such as BMW and racing teams in Moto GP such as Tech3 as well other series around the World. For this project, TYGA Performance reached out to PVM to supply a wheel specific to the requirements of the motorcycles we ride and love. The result are these beautiful and functional wheels you see on these pages.

Technical Features of PVM Forged Aluminium Wheels

Forged from AlMgSi1 aluminium

Crop-milled rim

100% quality control of forging process

Completely CNC-manufactured and thus virtually 100% free of imbalance and faults

Low unsprung weight and low rotating mass, drastically improving acceleration, braking and handling

More stable than conventional cast wheels

Far greater corrosion resistance compared to magnesium wheels, without increased mass.

Wheels come with all necessary bearings and hub spacers and valves

Specific details and features of the TYGA PVM wheels designed for MC28, NC30, NC35 application.

For the RVF400, VFR400 and MC28 NSR250: Please see set TWHL-0012

Fitment: They are a direct fitment for the models listed. The rears are specifically designed by us here at TYGA to fit the Honda street bike hubs without the need to modify or change the rear brake rotor mounting bolts and the fronts have the correct bearing spacing for Honda street bikes of that period, so no time wasted by the user adapting them to fit. Simply use together with the OEM wheel spacers.

Weight: Weight. These wheels are super light and suitable for racing. The front 3.50 weighs: 2.738 kg, the 5.00 rear weighs: 3.073 KG and the 5.50 weighs: 3.228 kg

Strength: These wheels are made from forged aluminium so super strong but much lighter than cast aluminium wheels They are stronger and less prone to corrosion and cracking than magnesium. See load chart below for details of maximum weights.

Peace of mind: They are brand new compared to most lightweight wheels available for these models which are mostly around 20 years old and therefore past their safe use date

Style: They look stylish and modern with the Y spoke design and the tough and elegant finish in gold, white and satin black give the perfect finishing touch to your motorcycle’s appearance.

Torque specs

Front Axle Nut: 60 Nm (43 ft-lb)

Rear Wheel Nut: 120 Nm (87 ft-lb)

TYGA no: TWHL-0013

SKU: alg-10302 Categories: , , , , ,
Read more

Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R

12.23

(14.80 inc. VAT )

Tyga Step Kit Replacement Brake Master Holder Plate, CBR250R/CBR300R

TYGA no: STBH-0003

SKU: hon-10795 Categories: , ,
Read more

TYGA 300cc Bigbore Top End Rebuild Kit

135.19

(163.58 inc. VAT )

The kit includes all piston assy and gasket parts to rebuild one cylinder on your NSR300. For complete overhaul to both cylinders, please order two kits.

TYGA no: TPER-0016

SKU: hon-10826 Categories: , , , , , , ,
Read more

Silencer aluminium Classic “SHORTY” 60mm, 2 stroke stainless endcap

76.12

(92.11 inc. VAT )

Silencer, Shorty, Aluminium Classic, Two Stroke, Assy.

This shorty aluminium two stroke silencer has been designed for those owners of two stroke motorcycles looking for a more old fashioned classic look. They have similar dimensions and perform the same as our other two stroke silencers and are available with two different colour options for the exhaust exit cap and nozzle to suit the customers’ requirements.

Stainless steel pressed mounting end cap with 3 M6 threaded holes for mounting to exhaust chamber flange
Stainless steel exit end cap and long nozzle in traditional design with choice of raw stainless or black powder-coated finish
Cartridge glass wool insulation for greater longevity
Lightweight: weighs just 0.7kg
Tough anodised body finish for enhanced looks and weather resistance
Silencer is supplied with paper gasket and stainless steel bolts and washers.

“Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.”

Compatible Parts:

All Tyga Performance Two Stroke chamber sets. Remember to order enough silencers for one complete system!

Other Alternative Products:

EXSL-0001 Aluminium Classic
EXSL-9005 Aluminium Premium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
EXSL-0067 Shorty Aluminium Premium
EXSL-0065 Shorty Carbon
EXSL-0066 Shorty Carbon/Kevlar

Read more

Flywheel remover OEM Honda, Honda NSR125/150

51.80

(62.68 inc. VAT )

Genuine Honda tool for removing the flywheel.

TYGA no: TYTO-0007

SKU: hon-10330 Categories: , , , , ,
Read more