Set pipe Full race system WSS300, KTM RC390 2022-
€1,180.91
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0160
SKU: ktm-10196 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSet exhausts side by side stainless steel, Honda NSR250 MC21
€769.95
The ultimate set for your Honda NSR250 NSR300!!
Set exhausts side by side stainless steel, Honda NSR250 MC21/MC28
Constructed in stainless steel, TYGA Performance combine modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and track testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut but this is where the automation ends. All chambers are hand rolled and welded by expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Our TYGA Performance Honda NSR250 two stroke motorcycle expansion systems are now THE system to have gracing your NSR250. And why not? TYGA pipes for NSR 250s are available for MC21 and MC28 models and there are two styles of chamber to choose from:
Tyga Side By Side (SS) which exit conventionally on left and right
For more information on how to get the best power out of this system, combine it with other parts of our MC21 Power Up Kit (see under ‘technicical help’ on right hand menu) to give your bike a massive power increase. In addition to performance, the chambers will enhance the bike’s appearance and save weight too. There is no need to compromise with fit either. The chambers are designed to give clearance to the swing arm and stock footpeg hangers as well as work with our Tyga Performance step kit. The stock bodywork does not need to be cut, (though repositioning of rear lower cowling down by 25mm is recommended)Important when ordering
Not included are the silencers.
Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0005a
SKU: hon-10260 Categories: 2 stroke exhaust sets, ALL products, By model, Exhausts, Exhausts, Honda, NSR250 MC21, ShopMirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
VHM piston (14mm piston pin) RS125 NF4 1987-’94 – RS250 NF5 1987-’92
€137.00
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: APHO12521717
SKU: alg-10401 Categories: ALL products, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsUpper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Carbon/kevlar headlight shroud (pair) GP-T
€100.33
Carbon/kevlar headlight shroud (pair) GP-T
TYGA no: BPKX-9433
SKU: hon-10543 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopLower Cowling (Carbon), NC35, T13, Assy.
€566.16
This lower cowling is part of a set of bodywork BPFS-0116.
TYGA no: BPCL-9218
SKU: hon-10806 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Tank cover, CBR125/CBR150/CBR250 2011 – CBR300 2014
€107.43
This lightweight and attractive real carbon cover will make your bike stand out from the crowd and fits in minutes.
TYGA no: BPCX-7108
SKU: hon-10168 Categories: ALL products, Carbon, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR300R 2014-, Honda, Shop, Various parts, Various parts